Electrochemical Dissolution Behavior of Different Surface Covering Layers of a Ni-based Superalloy in Different Electrolyte Solutions

Y.C. Wang,Yanhong Yang,Jinglong Qu,Chuanyong Cui

DOI: https://doi.org/10.1016/j.ijoes.2023.100451

IF: 1.541

2023-01-01

International Journal of Electrochemical Science

Abstract:Purification smelting after surface impurity removal is an application trend of superalloy regeneration technology. The electro-chemical method can be used to remove metal impurities such as oxide layer and coating. The electrochemical dissolution behavior of a Ni-based superalloy with coating and oxide layer has been studied in 3.5 wt.% NaCl solution and aqua regia solution. The results show that the coating on the alloy has pitted in 3.5 wt.% NaCl solution, forming a "occlude corrosion cell" and leaving many pits. The oxide layer itself is a passivation film with high stability in 3.5 wt.% NaCl solution. However, strong corrosion occurred on the alloy in aqua regia solution, and the surface coating and oxide layer of the alloy were peeled off in large quantities. The results indicated that, the oxide layer like a high corrosion resistance “coating” prevent the alloy from reacting with the electrolyte. However, due to the poor density of the oxide layer, the electrolyte flow into the alloy matrix along the gap of the oxide layer, and the electrochemical reaction occur-ed with the matrix. In aqua regia electrolyte, the oxide layer is thus peeled off. In this study, the dissolution behavior of coating and oxide layer in different electrolyte solutions has been elucidated, the dissolution model of alloy surface coating and the spalling mechanism of oxide layer have been established.