Abstract:To improve the hot corrosion performance of TiAl alloys, an Al-Y coating was prepared by a pack cementation process. The effect of catalysts on the structure of the Al-Y coating and its thermal shock resistance was studied. The thermal corrosion performance of both the TiAl alloy and the coating in a mixed molten salt system of 25% NaCl+75% Na 2 SO 4 (wt.%) was comparatively investigated. The results showed that the Al-Y coatings prepared with different catalysts had similar structures and good metallurgical bonding with the substrate, which was mainly composed of an Al-rich outer layer, a TiAl 3 middle layer, and a TiAl 2 inner layer. However, the coating prepared using NH 4 Cl as the catalyst was more uniform and denser than those formed using NaF and AlCl 3 ·6H 2 O. The Al-Y coating improved the thermal shock resistance of the TiAl alloy under thermal shock at 1273 K. Hot corrosion tests showed that the lamellar α 2 -Ti 3 Al phase in the TiAl alloy first underwent selective corrosion by O and S atoms in the medium, followed by catastrophic corrosion. Moreover, the Al-Y coating formed a dense Al 2 O 3 film in the early stage of hot corrosion, which effectively protected the permeable layer. Upon extending the hot corrosion time, the coating gradually cracks due to the internal and external diffusion of atoms and corrosion stress. The formed cracks served as diffusion channels for S and O atoms, and the TiAl 3 phase in the coating continued to decompose, providing more Al atoms to the cracks. This eventually formed a dense layer of Al 2 O 3 to compensate for the cracks, delaying the internal diffusion rate of S and O atoms, and significantly improving the thermal corrosion resistance of the TiAl alloy.

Hot Corrosion of Arc Ion Plating NiCrAlY and Sputtered Nanocrystalline Coatings on a Nickel-Based Single-Crystal Superalloy

Hot corrosion of sputtered nanocrystalline coating with and without preoxidation and arc ion plating coating on a Ni-based single-crystal superalloy

Influences of MCrAlY Coatings and TBCs on Oxidation Behavior of a Ni-Based Single Crystal Superalloy

Studies on Corrosion Behavior of a Single-Crystal Superalloy and Its Sputtered Nanocrystalline Coatings with Solid NaCl Deposit in O2 + 38 Vol.% H2O Environment at 700 °C

Hot Corrosion and Electrochemical Behavior of NiCrAlY, NiCoCrAlY and NiCoCrAlYTa Coatings in Molten NaCl-Na2SO4 at 800 °C

Effect of Pt-rich Position on the Hot Corrosion Behavior of NiCoCrAlY Coating for a Single-Crystal Superalloy

Effect of Pt modification on hot corrosion resistance of NiCrAlYSi+AlY coating at 900 °C

Corrosion resistance of NiCrAl coatings in the salt spray tests

Influence of Cr Content on Hot Corrosion and a Special Tube Sealing Test of Single Crystal Nickel Base Superalloy

High-Temperature Hot Corrosion Resistance of CrAl/NiCoCrAlY/AlSiY Gradient Composite Coating on TiAl Alloy

Preparation and Hot Corrosion Behaviour of a MCrAlY + AlSiY Composite Coating

Hot Corrosion Behavior of the Nanostructured NiCrBSi-TiB2 Coating in Molten Sulfate Salt

High-temperature oxidation and hot corrosion of Ni-based single crystal superalloy in the incubation stage

High Temperature Corrosion Resistance Of Nicraly/Al Composite Coatings On Surface Of Ti-6al-4v Alloy

A Study of the Hot Salt Corrosion Behavior of Three Nickel-Based Single-Crystal Superalloys at 900 °C

Tribocorrosion Properties Of Nicraly Coating In Different Corrosive Environments

Microstructure and hot corrosion properties of an Al-Y coating on TiAl alloy

Hot Corrosion Behaviour of Single-Phase Platinum-Modified Aluminide Coatings: Effect of Pt Content and Pre-Oxidation

High temperature oxidation and interdiffusion behavior of recoated NiCoCrAlY coating on a nickel-based superalloy

Hot corrosion behavior of CoCrNiAlY–YSZ–RSZ dual-ceramic thermal barrier coating with Al plating in molten sulfate mixture

Cyclic oxidation behavior of Pt modified NiCoCrAlYHfZr + AlNiY coating on a Ni-based single crystal superalloy