Abstract:One of the investigation areas regarding the Ultrasonic Non-Destructive Test (UT-NDT) is the development of non-contact technologies like Air-Coupled UT, EMAT or UT generated by Laser. These technologies show several interesting advantages like no couplant needed or their application to the inspection of components with complex geometries and extreme surface conditions (temperature, roughness, radiation...). In the Laser Ultrasonics Techniques (LUS), ultrasound is generated by a pulsed laser that produces a thermal expansion of the surface where it impacts and generates vibrations at ultrasonic frequencies. These vibrations can travel through the inside of the material and its surface; and they are reflected, refracted or diffracted in the defects or discontinuities of the material. The disturbances generated by the interaction of the vibration with the defects are detected in another point of the material using a secondary detection system. Tecnatom is working with LUS technology since 2010, acquiring, installing and optimizing a laboratory system for its implementation in the inspection of metallic materials (aluminum, carbon steel and stainless steel). During this time, several works have been carried out to determine the scope of the technology as: initial study for the characterization of the waves generated by the laser; studies in test blocks without discontinuities to determine the experimental conditions in which ultrasonic disturbances are generated in thermo-elastic and ablative regime; simulations and microstructural studies of the pieces to determine both the structural state and the residual stresses caused by the incidence of the laser; inspection of blocks with artificial reflectors, both superficial and embedded, and set-up techniques to increase the amplitude of the detected signal; optimization of the detection system through the combination of technologies and identification of safety criteria, use and improvement of the system for validation use in industrial environments. In this work, Tecnatom presents the main conclusions of the development carried out to determine the capacities and limitations of the techniques based on Laser Ultrasonics for its application in Non-Destructive Testing for the inspection of metallic components.

Advances in Postprocessing Technology for Laser Ultrasound Detection Signals: A Review

Nondestructive Evaluation of Special Defects Based on Ultrasound Metasurface

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Optical methods of laser ultrasonic testing technology in the industrial and engineering applications: A review

Detecting features of defect metal based on laser ultrasonic technique

Quantitative Detection of Surface Defect Using Laser-Generated Rayleigh Wave with Broadband Local Wavenumber Estimation

Contemporary ultrasonic signal processing approaches for nondestructive evaluation of multilayered structures

Research On Laser Ultrasonic Visual Image Processing

Image quality improvement in multi-mode laser ultrasound imaging using reconstructed synthetic aperture focusing technique

Adaptive Beamforming and Multiwave Fusion for Precise Laser Ultrasound-Based Nondestructive Evaluation

A Systematic Review of Ultrasonic Techniques for Defects Detection in Construction and Building Materials

Advances in Online Detection Technology for Laser Additive Manufacturing: A Review

A Review of Laser Ultrasonic Lamb Wave Damage Detection Methods for Thin-Walled Structures

Nondestructive detection of laser-cladding coating interface defects: a deep learning-enhanced laser ultrasonics approach

Laser ultrasonics for nondestructive testing of composite materials and structures: A review

Laser ultrasonic imaging of complex defects with full-matrix capture and deep-learning extraction

Non-destructive laser-ultrasonic Synthetic Aperture Focusing Technique (SAFT) for 3D visualization of defects

A modified synthetic aperture focusing algorithm used for transmission detection based on laser ultrasonics method

Laser ultrasonic inspection of surface and subsurface defects in materials based on deep learning

A Review of Signal Processing Techniques for Ultrasonic Guided Wave Testing

Laser generated Ultrasound System (LUS) and its application for the Non-Destructive Testing of metallic components