Abstract:To address the issues of large imaging errors for small defects and the difficulty in depth evaluation using local wavenumber estimation for surface defect imaging, a novel three-dimensional (3D) evaluation method for surface defects using broadband laser-generated Rayleigh waves with wavenumber analysis is proposed. A finite element model is established to investigate the interaction between the Rayleigh wave and the surface defect and reveal the wavenumber change mechanism of the non-dispersive Rayleigh wave in the case of defects. It is discovered that when the Rayleigh wave encounters the surface defect, various mode-converted scattered waves are generated, resulting in the appearance of new components with wavenumbers lower than that of the incident Rayleigh wave in the wavenumber domain. Additionally, the maximum amplitude of the Rayleigh wave in the B-scan image increases as the defect depth increases. Based on the simulation analysis, a 3D evaluation method for surface defects is proposed. Firstly, the scattered Rayleigh wave caused by the defect is extracted using frequency-wavenumber analysis. Secondly, a space-frequency-wavenumber analysis is used to determine the local wavenumber of the scattered Rayleigh wave for defect imaging. Finally, the defect depth is estimated by analyzing the maximum amplitude of the Rayleigh wave. A surface defect detection experiment is conducted to verify the effectiveness of the proposed method, and the experimental results demonstrate that the proposed method can suppress noise interference and accomplish high-precision imaging of small surface defects compared to the traditional method. Moreover, the method can establish a linear mapping relationship between the defect depth and the maximum amplitude of the Rayleigh wave for depth evaluation. The research results can provide a potential application for the 3D evaluation of surface defects.

Non-destructive laser-ultrasonic Synthetic Aperture Focusing Technique (SAFT) for 3D visualization of defects

Frequency Domain Synthetic Aperture Focusing Technique for Variable-Diameter Cylindrical Components.

Nondestructive Evaluation of Special Defects Based on Ultrasound Metasurface

Defect imaging based on laser ultrasonic frequency domain synthetic aperture focusing technology with separated generation–detection and 2-D equivalent velocity mapping

Frequency-domain Synthetic Aperture Focusing for Helical Ultrasonic Imaging

A modified synthetic aperture focusing algorithm used for transmission detection based on laser ultrasonics method

Multi-mode laser-ultrasound imaging using Time-domain Synthetic Aperture Focusing Technique (T-SAFT)

Quantitative Detection of Surface Defect Using Laser-Generated Rayleigh Wave with Broadband Local Wavenumber Estimation

A Novel 3D Evaluation Method for Surface Defects Using Broadband Laser-Generated Rayleigh Waves with Wavenumber Analysis.

3-D Ultrasonic Image Reconstruction in Frequency Domain Using a Virtual Transducer Model.

Image quality improvement in multi-mode laser ultrasound imaging using reconstructed synthetic aperture focusing technique

Detecting features of defect metal based on laser ultrasonic technique

Fully Noncontact Hybrid NDT for 3D Defect Reconstruction Using SAFT Algorithm and 2D Apodization Window

Time-domain Approach for Ultrasonic Non-destructive Detection Based on Synthetic Aperture Focusing Technique

Wavenumber-Domain Fast Reconstruction Technique Using Ultrasonic Scanning for Transverse Wave Imaging

Synthetic Aperture Focusing Technique in High - Frequency Ultrasound Imaging to Locate Layer Delamination

Characterization of internal defects in cylindrical components using laser ultrasonic method with a modified SAFT algorithm

Width and Depth Gauging of Rectangular Subsurface Defects Based on All-Optical Laser-Ultrasonic Technology

Effective Defect Features Extraction for Laser Ultrasonic Signal Processing by Using Time–Frequency Analysis

Fast 3-D Ultrasonic Imaging Using Time-Domain Synthetic Aperture Focusing Techniques Based on Circular Scan Conversions

Research on Photoacoustic Synthetic Aperture Focusing Technology Imaging Method of Internal Defects in Cylindrical Components