Abstract:Considering the fact that the acoustic attenuation increases with the carrier frequency, the attention shifts towards the low-frequency ultrasonic waves in the field of ultrasonic nondestructive testing and structural health monitoring of highly attenuative materials. However, low-frequency ultrasonic waves may sharply reduce the imaging resolution, although it can propagate longer distance. When an ultrasonic primary longitudinal wave tone burst propagates through an elastic solid with quadratic nonlinearity, it results in the generation of the quasi-static component (QSC). The QSC has advantages of low attenuation and better sound beam directivity, so it is expected to be a novel tool for non-destructive testing of highly attenuative materials. Therefore, aimed at detecting defects and improving the imaging quality in highly attenuative materials, a novel synthetic aperture focusing technique in the time domain combined with nonlinear ultrasonic QSC is proposed. In this study, experimental examinations were carried out to evaluate the imaging performance of the proposed method and low-frequency ultrasonic waves, in which a pulse-echo transducer is used to detect the QSC pulse generated by a primary longitudinal wave. The imaging results indicate that the proposed method has significant advantages over low-frequency ultrasonic waves in terms of visual presentation of defects. The effect of the duration of the tone burst on imaging quality is also investigated, and the results show that the imaging quality is optimal when the cycle number meets the requirement for the maximum response of QSC. This study would open new perspectives for the research on ultrasonic imaging in highly attenuative materials.

A Systematic Review of Ultrasonic Techniques for Defects Detection in Construction and Building Materials

Nondestructive Evaluation of Special Defects Based on Ultrasound Metasurface

Research on Ultrasonic Detection of Complex Surfaces

Application of Ultrasonic Computed Tomography (UCT) Technology to Detect Defects in Stone

Ultrasonic Testing of Carbon Fiber-Reinforced Polymer Composites

Ultrasonic guided wave techniques and applications in pipeline defect detection: A review

Quantitative Detection of Defect Using Ultrasound Infrared Lock-In Thermography

The Review about Method of Ultrasonic Detection of Concrete Damage

Application of laser ultrasonic testing technology in the characterization of material Properties: A review

Application Research of Ultrasonic-Guided Wave Technology in Pipeline Corrosion Defect Detection: A Review

Survey of Materials Testing Using Ultrasonic

Synthetic Aperture Focusing Imaging for Defect Detection in Highly Attenuative Materials Using Quasi-Static Components of Ultrasonic Longitudinal Waves

Ultrasonic Testing in the Field of Engineering Joining

Experimental Analysis of Surface Defects Detection Method Based on Ultrasonic Signal

Contemporary ultrasonic signal processing approaches for nondestructive evaluation of multilayered structures

High fidelity ultrasonic measurements for defect detection and characterization

The Application Research of Laser Ultrasonic Technique Used in Testing Compound Material

A review of ultrasonic testing applications in additive manufacturing: Defect evaluation, material characterization, and process control

Development of a novel experimental system for structural non-destructive testing based on ultrasonic thermography

Research on Defect Detection from Incomplete Scanning of X-ray

Development,applications and challenges in ultrasonic guided waves testing technology