Abstract:To further improve the thermal shock resistance and ablation resistance of SiBCN system ceramics targeted much harsh environment, both ultra-high temperature ceramic phases and carbon fibers are expected to be incorporated simultaneously as the reinforcements. However, tough problems like difficulty in densification as well as degradation of C fibers (Cf) due to interfacial reaction usually cannot be avoided. Thus, in this study, Zr as well as chopped Cf with BN coating were introduced into SiBCN ceramics by mechanical alloying and after hot-pressing sintering to prepare C/SiBCNZr composites. The structure and phase component development have been characterized in detail by XRD, SEM, TEM and XPS etc., and mechanical properties, fracture behavior and toughening mechanisms were also investigated. Zr-B and Zr-O bonds are detected besides Si-C, N-B and N-B-C bonds when pre-alloyed ZrB2 amorphous powder was incorporated into SiBCN system by further mechanical-alloying treatment. After hot-pressing, the ultra-high temperature phases of ZrB2 and ZrN were formed as expected besides the original matrix phases of BN(C) and SiC. Excellent mechanical properties can be obtained for SiBCNZr ceramic. The BN coating on carbon fibers successfully avoids the severe fiber degradation and makes it possible for moderating strong interface bonding, which ensuring the debonding, crack deflection, fiber pulling-out and bridging during the fracture. As a result, the C/SiBCNZr composites retain good mechanical properties and fractures in a pseudoplastic fracture manner, showing better potential applications in harsh environments. Optimization of the BN coating on Cf and Zr incorporation by pre-mechanical alloying can be a good route to achieve Cf/SiBCNZr composites with a better balance between thermal shock resistance, ablation resistance and mechanical properties.

Effect of Zr Content on Microstructure and Performance of Polycrystalline SiC Fiber

The fiber structure evolution and performance changes of SiC–ZrC fibers after 1600 °C heat treatment

Processing, microstructure, and mechanical properties of chopped SiC fibers reinforced ZrB2–hBN–based composites

Effects of Zr on the Precursor Architecture and High-Temperature Nanostructure Evolution of Sioc Polymer-Derived Ceramics

Microstructural Evolution and Performance of Carbon Fiber-Toughened ZrB2 Ceramics with SiC or ZrSi2 Additive

Influence of SiCnp Content on the Microstructure and Mechanical Properties of ZrB2–SiC Nanocomposite

Effects of Zr and chopped C fiber on microstructure and mechanical properties of SiBCN ceramics

Influence of the Microstructure Evolution of ZrO2 Fiber on the Fracture Toughness of ZrB2–SiC Nanocomposite Ceramics

Microstructure and Mechanical Properties of ZrB2-SiC Composites

Effects of SiC Platelet and ZrSi2 Additive on Sintering and Mechanical Properties of ZrB2-based Ceramics by Hot-Pressing

Influence of Hot Pressing Temperature and SiC Content on the Microstructure and Mechanical Properties of ZrB2-SiC

Pressureless Sintering of Silicon Carbide Ceramics Containing Zirconium Diboride

SPS Sintering Behavior and Microstructure of ZrB2-SiCpl Composite Ceramics

The Effect of Tio2 and Zro2 Additives on the Density, Microstructure, and Mechanical Properties of Pressureless Sintered Sic-B4c

Microstructure and mechanical properties of ZrB2–SiC nanocomposite ceramic

Effect of Zr2Al4C5 Content on the Mechanical Properties and Oxidation Behavior of ZrB2-SiC-Zr2Al4C5 Ceramics

Research on the Interfacial Structure and Property Improvement of the Cfiber/2Si-B-3C-N Ceramic Matrix Composite

Synthesis of Coatings on SiC Fibers and Their Effects on Microstructure and Mechanical Properties of SiCf/SiBCN Composites

Fabrication and microstructure evolution of Csf/ZrB2-SiC composites via direct ink writing and reactive melt infiltration

Effects of Short Carbon Fiber on Mechanical Properties of ZrB2-SiC Ultra-high Temperature Ceramics

Zirconia Reinforced Reaction Bonded Silicon Carbide Composites: Microstructure and Mechanical Properties