Abstract:Zirconium diboride-silicon carbide based ceramics are attractive for application in aircraft propulsion systems and thermal protection system for hypersonic vehicle because of their high melting point,high thermal and electrical conductivity and good chemical stability.However,the major problems associated with ZrB2/SiC are lack of damage tolerance and insufficient strength as structure components.ZrB2-20%(volume fraction) SiC ceramics with the additional short carbon fiber was developed to promote graceful failure using hot pressing technique. The results show that the introduction of short carbon fiber into the ZrB2-20%SiC matrix results in an apparent increase in fracture toughness from 2.0MPa·m1/2 to 6.56MPa·m1/2 and not evidently change in flexural strength from 502MPa to 445MPa and elastic modulus from 414GPa to 322GPa.Meanwhile the influence of short carbon fiber on the strength,and modulus is analyzed and estimated using a modified role-of-mixture formulation and that on the toughness is also calculated based on the toughening mechanisms of crack bridging,fiber pullout and crack deflection.The calculated results of the strength,elastic modulus and fracture toughness of the composite agree well with the experimental results.

Microstructural Evolution and Performance of Carbon Fiber-Toughened ZrB2 Ceramics with SiC or ZrSi2 Additive

Analysis of the Mechanical Properties in Short Carbon Fiber-toughened ZrB2—SiC Ultra-high Temperature Ceramic

Microstructure, Mechanical Properties and Thermal Shock Resistance of ZrB 2 -Sic-c F Composite with Inhibited Degradation of Carbon Fibers

Effects of Short Carbon Fiber on Mechanical Properties of ZrB2-SiC Ultra-high Temperature Ceramics

Mechanical Properties of Short Carbon Fiber Reinforced ZrB2–SiC Ceramic Matrix Composites

Microstructure and mechanical properties of ZrB2–SiC–ZrO2f ceramic

Toughening Effect of Short Carbon Fibers in the ZrB2–ZrSi2 Ceramic Composites

Microstructure, Mechanical Properties and Thermal Shock Resistance of Zirconium Diboride Containing Silicon Carbide Ceramic Toughened by Carbon Black

Fabrication and Properties of Short Carbon Fiber-ZrB2 Ceramic Matrix Composites

Processing and Mechanical Properties of Short Carbon Fibers Toughened Zirconium Diboride-Based Ceramics

Influence of the Microstructure Evolution of ZrO2 Fiber on the Fracture Toughness of ZrB2–SiC Nanocomposite Ceramics

Characterization of hot-pressed short carbon fiber reinforced ZrB2–SiC ultra-high temperature ceramic composites

Densification, microstructure and mechanical properties of ZrB2–SiCw ceramic composites

Effect of Pyrolytic Carbon Coating on the Microstructure and Fracture Behavior of the Cf/ZrB2-SiC Composite

Effects of SiC Platelet and ZrSi2 Additive on Sintering and Mechanical Properties of ZrB2-based Ceramics by Hot-Pressing

Preparation and flame ablation/oxidation behavior of ZrB2/SiC ultra-high temperature ceramic composites

Design and Optimization of the Coating Thickness on Chopped Carbon Fibers and Sintering Temperature for ZrB2-SiC-C-f Composites Prepared by Hot Pressing

The hybrid effect of SiC whisker coupled with ZrO 2 fiber on microstructure and mechanical properties of ZrB 2-based ceramics

Fabrication and Characterization of B4C–ZrB2–SiC Ceramics with Simultaneously Improved High Temperature Strength and Oxidation Resistance Up to 1600 °C

High-Performance Zrb2-Sic-C-F Composite Prepared by Low-Temperature Hot Pressing Using Nanosized Zrb2 Powder

Processing, microstructure, and mechanical properties of chopped SiC fibers reinforced ZrB2–hBN–based composites