Abstract:The damage mechanism of carbon fiber and fiber-ceramic interface of CarC-SiC were investigated and revealed. The chemical reactions of C with ZrO2 and SiO2 impurities during the sintering resulted in the surface and grain etching of fiber. The ZrC-SiC ceramics diffused into interface to form a strong bonding under high temperature and press, leading to a failure of stress release and guiding the crack propagation direct across fiber. Both consequently impeded the fiber pull-out and bridging. By obvious contrast, the chemical etching of fiber was effectively inhibited utilizing PyC coating as transition layer, and the strong bonding of fiber with ceramic was relieved at the same time replaced by a relatively weak bonding. As a result, the fiber pull-out and fiber bridging were boosted with a longer length more than 50 mu m, over 2 times of uncoated composite, accompanied with obvious crack branching and deflection, together resulting in a graceful mechanical feedback with 2.5 times of work of fracture and improved fracture toughness. This work not only revealed the microstructure forms and inherent mechanism on structure damage of carbon fiber, but also offered an effective method of protecting fiber and tailoring the interface bonding, thereby guiding the design of C-f/ZrC-SiC with graceful mechanical performance.

Effect of Pyrolytic Carbon Coating on the Microstructure and Fracture Behavior of the Cf/ZrB2-SiC Composite

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Characterization and mechanical properties of Cf/ZrB2-SiC composites fabricated by a hybrid technique based on slurry impregnation, polymer infiltration and pyrolysis and low-temperature hot pressing

Using PyC Coated Short Chopped Carbon Fiber to Tackle the Dilemma Between Toughness and Strength of ZrC-SiC

Enhanced mechanical properties and thermal shock resistance of Cf/ZrB2-SiC composite via an efficient slurry injection combined with vibration-assisted vacuum infiltration

Damage Mechanism Analysis to the Carbon Fiber and Fiber-Ceramic Interface Tailoring of Cf/ZrC-SiC Using PyC Coating

Design and Optimization of the Coating Thickness on Chopped Carbon Fibers and Sintering Temperature for ZrB2-SiC-C-f Composites Prepared by Hot Pressing

Study on toughening mechanisms of pyrolytic carbon interface layer in Cf/ZrB2-SiC composites using in-situ tensile experimental and numerical methods

Microstructures and Mechanical Properties of Cf/ZrB2-SiC Composite Fabricated by Nano Slurry Brushing Combined with Low-Temperature Hot Pressing

Microstructural Evolution and Performance of Carbon Fiber-Toughened ZrB2 Ceramics with SiC or ZrSi2 Additive

Mechanical Properties of Short Carbon Fiber Reinforced ZrB2–SiC Ceramic Matrix Composites

A Novel Vibration-Assisted Slurry Impregnation to Fabricate Cf/ZrB2-SiC Composite with Enhanced Mechanical Properties

Effects of Short Carbon Fiber on Mechanical Properties of ZrB2-SiC Ultra-high Temperature Ceramics

Architectural Engineering Inspired Method of Preparing C-f/ZrC-SiC with Graceful Mechanical Responses

Toughening Effect of Short Carbon Fibers in the ZrB2–ZrSi2 Ceramic Composites

Influence of the Microstructure Evolution of ZrO2 Fiber on the Fracture Toughness of ZrB2–SiC Nanocomposite Ceramics

Using Pyrolytic Carbon-Coated Short Carbon Fiber to Fabricate Csf/ZrB2-SiC Composites by Direct Ink Writing and Precursor Infiltration Pyrolysis

Analysis of the Mechanical Properties in Short Carbon Fiber-toughened ZrB2—SiC Ultra-high Temperature Ceramic

Fabrication and Properties of Short Carbon Fiber-ZrB2 Ceramic Matrix Composites

Microstructure, Mechanical Properties and Thermal Shock Resistance of ZrB 2 -Sic-c F Composite with Inhibited Degradation of Carbon Fibers

Achieving synergy of load-carrying capability and damage tolerance in a ZrB2-SiC composite reinforced through discontinuous carbon fiber