Abstract:Densification behavior, grain growth kinetics, mechanical and thermal properties of pressurelessly sintered zirconium diboride–silicon carbide (ZrB2–SiC) fabricated by extrusion of high solids loading pastes have been studied. The effects of sintering temperature (1600–2300°C), heating rate during constant heating rate sintering (10–50°C/min), and time during isothermal sintering (3–24 h) on density and grain size were examined. The apparent activation energy for densification was determined to be 940 ± 90 kJ/mol, suggesting lattice diffusion as the dominant sintering mechanism. Grain growth of both ZrB2 and SiC followed a normal grain growth power law with grain growth exponent n = 2 indicating diffusion‐controlled coarsening. The activation energies for grain growth were 267 ± 10 kJ/mol for ZrB2 and 264 ± 15 kJ/mol for SiC. Sintered microstructures were homogeneous with relative densities of 95%–99% depending on heat treatment schedules. Flexural strength (270 ± 40 MPa) was lower than hot‐pressed materials of equivalent composition by a factor of two or more due to the presence of pores originating from paste inhomogeneities. Young's modulus (482 ± 20 GPa) and Vicker's microhardness (22 ± 5 MPa HV0.2), as well as thermal diffusivity and thermal conductivity up to 1800°C were found to be comparable to hot‐pressed materials.

Influence of Hot Pressing Temperature and SiC Content on the Microstructure and Mechanical Properties of ZrB2-SiC

Effect of sintering temperature and holding time on the microstructure and mechanical properties of ZrB2–SiCw composites

Novel (Zr, Ti)B2-(Zr, Ti)C-SiC ceramics via reactive hot pressing

Effects of SiC Platelet and ZrSi2 Additive on Sintering and Mechanical Properties of ZrB2-based Ceramics by Hot-Pressing

Novel (Zr, Ti)(C, N)–SiC ceramics via reactive hot-pressing at low temperature

Pressureless Sintering of Silicon Carbide Ceramics Containing Zirconium Diboride

Preparation and Mechanical Properties of ZrB2-based Ceramics Using MoSi2 As Sintering Aids

Effect of Carbon Impurities on Hot-Pressed Zrb2-Sic Ceramics

Study on the Performance for Silicon Carbide Ceramics by Hot-pressing Sintering

Novel TiC-based ceramic with enhanced mechanical properties by reaction hot-pressing at low temperature

Interface characteristics in ZrB2-based ceramics containing SiC and/or ZrC particles via hot-pressing sintering

Preparation and flame ablation/oxidation behavior of ZrB2/SiC ultra-high temperature ceramic composites

Effects of SiC contents on the microstructure and mechanical properties of Al4SiC4–SiC ceramic composites

Microstructure and Mechanical Properties of Hot-Pressed Al2O3–mullite–ZrO2–SiC Composites

Mechanical Properties of Short Carbon Fiber Reinforced ZrB2–SiC Ceramic Matrix Composites

Effect of Nano SiC on Microstructure and Mechanical Properties of BN-ZrO2-SiC Multiphase Ceramics

Preparation, mechanical properties, and toughening mechanisms of SiCw/SiCp‐reinforced zirconia‐toughened alumina ceramics

Mechanical Properties of ZrB<sub>2</sub>-Based Ceramics Reinforced by Nano-SiC Whiskers

Effect of Brazing Parameters on the Microstructure and Properties of SiC Ceramic Joint with Zr-Cu Filler Metal

Effect of ZrB2 and its oxide impurities (ZrO2 and B2O3) on hot-pressed Si3N4 ceramics at low temperature

Pressureless sintering and properties of additively manufactured ZrB2–SiC