Abstract:As to minimize size of the measurement system of large size and ultra-long focal length lens, two mirrors are used to change light path. In this case, installation error of the two mirrors added may be a large obstacle to accurate measurement of ultra-long focal length lens. For the sake of analyzing how installation error of two mirrors infect the angle of Moiré stripes on receiver, Moiré stripes are understood as parallel lines which composed of point light source with certain light-path vector. This approach proposed uses the calculation formula from mirror deflection angle to the reflector unit normal vector, and the matrix form of the law of reflection, to calculate the relationship matrix from vector of incident light to vector of exit light. Based on unit normal vector of two mirrors, incident light-path vector, exit light-path vector, and analytic geometry, equation of line on which image of point light source place can be presented, so we can get the angle of Moiré stripes on receiver and so is the angle error caused by installation error of the two mirrors added into light path. In addition, the angle error of Moiré stripes is calculated theoretically in 49 different situations of small mirrors deflection smaller than 1 degree. The results indicate that the installation error of the two mirrors should be taken into consideration. A new method by using autocollimator to adjust the installation error of the two mirrors is proposed, installation error of the two mirrors can be controlled to lower than 1" through this method. Moiré stripes angle error should be better than (10-4) order of magnitude in this situation. Experimental results show that Moiré stripes angle measurement error is 0.005 degree, which fully illustrates the effect of mirrors adjustment when this system is used for the measurement of ultra-long focal length.

Subaperture Stitching Testing for Fine Flat Mirrors with Large Apertures Using an Orthonormal Polynomial Fitting Algorithm

Aspheric and Free-Form Surfaces Test with Non-Null Sub-Aperture Stitching

Non-null Annular Subaperture Stitching Interferometry for Aspheric Testing

Elimination of reference surface error on high-accuracy subaperture stitching

Aspheric Subaperture Stitching Based on System Modeling.

Influence of Alignment Error and Random Noise on Interferometry Flat Sub-Aperture Stitching

Subaperture alignment technique for large aperture mirrors

Analysis on mirrors installation error of high-accuracy long focal length measurement system

Interferometric Measurement of Freeform Surfaces Using Irregular Subaperture Stitching

Reserch on Technique of Large Aperture-Digital Wavefront Test

Design and Testing of a Compact Non-Orthogonal Two-Axis Lloyd's Mirror Interferometer for Fabrication of Large-Area Two-Dimensional Scale Gratings

Optimization of Transverse Translation Diverse Phase Retrieval for Optical Elements with Mid-Spatial Frequency Errors

Comprehensive Design and Calibration of an Even Aspheric Quarter-Wave Plate for Polarization Point Diffraction Interferometry.

Research on Two Optical Methods for Aspheric Measurement

Distortion Correction in Surface Defects Evaluating System of Large Fine Optics

Air Flow Turbulence Orthogonality and Surface Error Estimation in Large Aperture Optical Testing

One-dimensional Stitching Interferometry Assisted by a Triple-Beam Interferometer.

In-situ Sub-Aperture Stitching Measurement Based on Monoscopic Phase Measuring Deflectometry

Stitching interferometry using Computer-Generated Hologram (CGH) based on sub-aperture adjustment aberration of 2-D Chebyshev polynomial

Subaperture moving strategy and related systematic errors in stitching interferometry of X-ray mirrors

Mixed compensation for the testing of large convex aspheres