Abstract:Large gas turbines often utilize dual-rotor structures to improve efficiency. To facilitate manufacture and maintenance, the large rotor systems are typically constructed by connecting components made from different materials together through the bolted joint. In this work, a dynamic model of a dual-rotor system with bolted joint included in the high-pressure (HP) rotor is established based upon the finite element theory of Timoshenko beam element, as well as taking into account the bearing forces and fixed-point rubbing fault. To evaluate the influence of rubbing faults on the dynamic behavior of a dual-rotor system, this study analyzed the response characteristics of the rotor under the cases of the LP rotor and the HP rotor subjected to the rubbing fault, respectively. In order to further reveal the effect of bolted joint structure on the system response while rubbing fault occurs, piecewise linear bending stiffness is also considered in this study. The nonlinear vibration responses of the bolted joint dual rotor-bearing system are studied through numerical simulation. Effect of rotor–stator contact stiffness and the occurrence of rubbing faults at the low-pressure (LP) rotor and the HP rotor are investigated through frequency-amplitude curves, waterfall diagrams, time-domain responses, and bending stiffness of the bolted joint. The results indicate that the presence of rubbing faults, whether occurring at the LP rotor or the HP rotor, leads to a decrease in the critical speed. Furthermore, under a rubbing fault, the bending stiffness of the bolted joint enters the stiffness softening region earlier and exhibits a wider range, which is exacerbated with increased contact stiffness. This phenomenon is considered one of the main causes of system response instability. Finally, the experimental studies are carried out on a bolted joint dual-rotor test rig to validate the numerical simulation results.

The Global Responses Characteristics of a Rotor/stator Rubbing System with Dry Friction Effects

Differential Model of Friction Based on Bristle Model and Phase-Transition Theory

Rubbing phenomena in rotor–stator contact

Numerical and Experimental Research on Engagement Process of Wet Multi-Plate Friction Clutches with Groove Consideration

Random Response Evaluation of Mono-Stable and Bi-Stable Duffing Systems with Dahl Friction

Dynamic Response of Rubbing Happening in A Flexible Rotor-Bearing System

ANALYSIS OF THE MULTIPLE-SOLUTION RESPONSE OF A FLEXIBLE ROTOR SUPPORTED ON NON-LINEAR SQUEEZE FILM DAMPERS

Study on dynamic characteristics of the gear-dual-rotor system with multi-position rubbing

The Partial and Full Rubbing of a Flywheel Rotor–bearing–stop System

The numerical modeling of rotor–stator rubbing in rotating machinery: a comprehensive review

Nonlinear dynamic of the rod-fastening combined rotor system with rub-impact based on the Stribeck friction model

Stiffening effect of the rotor during the rotor-to-stator rub in a rotating machine

Radial Vibration Characteristics of a Double-overhung Rub Rotor

Rub-impact Behavior Study of a Flywheel Rotor by Considering the Friction Coefficients Effect

Rubbing Effect Analysis in a Continuous Rotor Model

Experimental Investigation of Rotor Rubbing Faults

Rub-impact dynamic analysis of a dual-rotor system with bolted joint structure: Theoretical and experimental investigations

Dynamics research on the rubbing process and rubbing forms of rotor–blade–casing systems

On the Vibration of Rotor with Rotor/Stopper Rubbing

Transient State Analysis of a Rub-Impact Rotor System During Maneuvering Flight

Rub Fault Diagnostics by Dynamic Characteristics Analysis of a Multi-Disk Rotor System