Abstract:Large gas turbines often utilize dual-rotor structures to improve efficiency. To facilitate manufacture and maintenance, the large rotor systems are typically constructed by connecting components made from different materials together through the bolted joint. In this work, a dynamic model of a dual-rotor system with bolted joint included in the high-pressure (HP) rotor is established based upon the finite element theory of Timoshenko beam element, as well as taking into account the bearing forces and fixed-point rubbing fault. To evaluate the influence of rubbing faults on the dynamic behavior of a dual-rotor system, this study analyzed the response characteristics of the rotor under the cases of the LP rotor and the HP rotor subjected to the rubbing fault, respectively. In order to further reveal the effect of bolted joint structure on the system response while rubbing fault occurs, piecewise linear bending stiffness is also considered in this study. The nonlinear vibration responses of the bolted joint dual rotor-bearing system are studied through numerical simulation. Effect of rotor–stator contact stiffness and the occurrence of rubbing faults at the low-pressure (LP) rotor and the HP rotor are investigated through frequency-amplitude curves, waterfall diagrams, time-domain responses, and bending stiffness of the bolted joint. The results indicate that the presence of rubbing faults, whether occurring at the LP rotor or the HP rotor, leads to a decrease in the critical speed. Furthermore, under a rubbing fault, the bending stiffness of the bolted joint enters the stiffness softening region earlier and exhibits a wider range, which is exacerbated with increased contact stiffness. This phenomenon is considered one of the main causes of system response instability. Finally, the experimental studies are carried out on a bolted joint dual-rotor test rig to validate the numerical simulation results.

Rubbing Effect Analysis in a Continuous Rotor Model

Dynamic Behavior Analysis of a Rotor-Bearing-Squeeze Film Damper Coupling System with Bearing Outer Race Localized Defect

The numerical modeling of rotor–stator rubbing in rotating machinery: a comprehensive review

Study on Model of Continuous Rotor under Steam Seal Force

Modeling a Two-Span Rotor System Based on the Hamilton Principle and Rotor Dynamic Behavior Analysis

Vibration Response Analysis of Rubbing Faults on a Dual-Rotor Bearing System

Simulation of Rotor'S Axial Rub-Impact in Full Degrees of Freedom

The Partial and Full Rubbing of a Flywheel Rotor–bearing–stop System

Dynamic Characteristics of Rub-Impact on Rotor System with Cylindrical Shell

Dynamics research on the rubbing process and rubbing forms of rotor–blade–casing systems

Dynamic Characteristics and Experimental Research of Dual-Rotor System with Rub-Impact Fault

Transient State Analysis of a Rub-Impact Rotor System During Maneuvering Flight

Nonlinear Dynamics of a Rub-Impact Rotor Supported by Oil Film Bearings with an Elastic Stator

Experimental Investigation of Rotor Rubbing Faults

Analysis of Nonlinear Vibration Characteristics and Whirl Behavior of Dual-Rotor Systems with Inter-Shaft Rub Impact

Nonlinear dynamic of the rod-fastening combined rotor system with rub-impact based on the Stribeck friction model

Rub-impact dynamic analysis of a dual-rotor system with bolted joint structure: Theoretical and experimental investigations

Stiffening effect of the rotor during the rotor-to-stator rub in a rotating machine

Fractional-Order Modeling and Stochastic Dynamics Analysis of a Nonlinear Rubbing Overhung Rotor System

Chaotic behavior of a rub rotor model

The Influence Of Damping Coefficient On Vibration Characteristic Of A Rub-Impact Rotor Under Axial Thrust