Abstract:Large gas turbines often utilize dual-rotor structures to improve efficiency. To facilitate manufacture and maintenance, the large rotor systems are typically constructed by connecting components made from different materials together through the bolted joint. In this work, a dynamic model of a dual-rotor system with bolted joint included in the high-pressure (HP) rotor is established based upon the finite element theory of Timoshenko beam element, as well as taking into account the bearing forces and fixed-point rubbing fault. To evaluate the influence of rubbing faults on the dynamic behavior of a dual-rotor system, this study analyzed the response characteristics of the rotor under the cases of the LP rotor and the HP rotor subjected to the rubbing fault, respectively. In order to further reveal the effect of bolted joint structure on the system response while rubbing fault occurs, piecewise linear bending stiffness is also considered in this study. The nonlinear vibration responses of the bolted joint dual rotor-bearing system are studied through numerical simulation. Effect of rotor–stator contact stiffness and the occurrence of rubbing faults at the low-pressure (LP) rotor and the HP rotor are investigated through frequency-amplitude curves, waterfall diagrams, time-domain responses, and bending stiffness of the bolted joint. The results indicate that the presence of rubbing faults, whether occurring at the LP rotor or the HP rotor, leads to a decrease in the critical speed. Furthermore, under a rubbing fault, the bending stiffness of the bolted joint enters the stiffness softening region earlier and exhibits a wider range, which is exacerbated with increased contact stiffness. This phenomenon is considered one of the main causes of system response instability. Finally, the experimental studies are carried out on a bolted joint dual-rotor test rig to validate the numerical simulation results.

Nonlinear Dynamics of a Rub-Impact Rotor Supported by Oil Film Bearings with an Elastic Stator

Stability of a Rub-Impact Rotor System

Vibration Analysis of a Nonlinear Rotor-Bearing-seal System

Modeling a Two-Span Rotor System Based on the Hamilton Principle and Rotor Dynamic Behavior Analysis

Periodic, quasi-periodic and chaotic vibrations of a rub-impact rotor system supported on oil film bearings

Lubrication and stability analysis of nonlinear rotor-bearing system

Chaotic behavior of a rub rotor model

On the Bifurcation and Stability of Periodic Motion of the Rotor-Bearing System with Rub-Impact and Oil Whirl

Nonlinear dynamic of the rod-fastening combined rotor system with rub-impact based on the Stribeck friction model

Dynamic Characteristics of Rotor System and Rub-Impact Fault Feature Research Based on Casing Acceleration

Modeling and Nonlinear Dynamic Characteristics Analysis of Fault Bearing Time-Varying Stiffness-Flexible Rotor Coupling System

Rub-impact dynamic analysis of a dual-rotor system with bolted joint structure: Theoretical and experimental investigations

Vibration Response Analysis of Rubbing Faults on a Dual-Rotor Bearing System

Dynamic Characteristics of Rub-Impact on Rotor System with Cylindrical Shell

Dynamic Characteristics and Experimental Research of Dual-Rotor System with Rub-Impact Fault

Dynamic Analysis in Full Degrees of Freedom of Rotor’s Radial Rub-impact with the Consideration of Nonlinear Fluid-structure Interaction Forces

Nonlinear dynamic characteristics induced by inter-shaft rub-impact in a counter-rotational dual-rotor system of aeroengine

Experimental Investigation of Rotor Rubbing Faults

Coupling dynamics of pedestal looseness and impact-rub for rotor system with nonlinear support

Dynamics analysis and experiment research of vibration response for dual-rotor system under rubbing fault

Nonlinear dynamic of flexible rotor supported by turbulent bearings with quadratic damping and temperature dependent viscosity