Abstract:Large gas turbines often utilize dual-rotor structures to improve efficiency. To facilitate manufacture and maintenance, the large rotor systems are typically constructed by connecting components made from different materials together through the bolted joint. In this work, a dynamic model of a dual-rotor system with bolted joint included in the high-pressure (HP) rotor is established based upon the finite element theory of Timoshenko beam element, as well as taking into account the bearing forces and fixed-point rubbing fault. To evaluate the influence of rubbing faults on the dynamic behavior of a dual-rotor system, this study analyzed the response characteristics of the rotor under the cases of the LP rotor and the HP rotor subjected to the rubbing fault, respectively. In order to further reveal the effect of bolted joint structure on the system response while rubbing fault occurs, piecewise linear bending stiffness is also considered in this study. The nonlinear vibration responses of the bolted joint dual rotor-bearing system are studied through numerical simulation. Effect of rotor–stator contact stiffness and the occurrence of rubbing faults at the low-pressure (LP) rotor and the HP rotor are investigated through frequency-amplitude curves, waterfall diagrams, time-domain responses, and bending stiffness of the bolted joint. The results indicate that the presence of rubbing faults, whether occurring at the LP rotor or the HP rotor, leads to a decrease in the critical speed. Furthermore, under a rubbing fault, the bending stiffness of the bolted joint enters the stiffness softening region earlier and exhibits a wider range, which is exacerbated with increased contact stiffness. This phenomenon is considered one of the main causes of system response instability. Finally, the experimental studies are carried out on a bolted joint dual-rotor test rig to validate the numerical simulation results.

Stiffening effect of the rotor during the rotor-to-stator rub in a rotating machine

Rubbing phenomena in rotor–stator contact

DETERMINATION OF THE RUBBING LOCATION IN A MULTI-DISK ROTOR SYSTEM BY MEANS OF DYNAMIC STIFFNESS IDENTIFICATION

Rub Fault Diagnostics by Dynamic Characteristics Analysis of a Multi-Disk Rotor System

Rub-impact Behavior Study of a Flywheel Rotor by Considering the Friction Coefficients Effect

Chaotic behavior of a rub rotor model

Dynamic Characteristics of Rub-Impact on Rotor System with Cylindrical Shell

Transient State Analysis of a Rub-Impact Rotor System During Maneuvering Flight

Experimental Investigation of Rotor Rubbing Faults

Nonlinear dynamic of the rod-fastening combined rotor system with rub-impact based on the Stribeck friction model

Dynamic Characteristics of Rotor System and Rub-Impact Fault Feature Research Based on Casing Acceleration

Nonlinear Vibration of Rotor Rubbing Stator Caused by Initial Perturbation

Vibration investigation of rotor system with unbalance and blade-casing rubbing coupling faults

Dynamic Response of Rubbing Happening in A Flexible Rotor-Bearing System

Rubbing Effect Analysis in a Continuous Rotor Model

Stability of a Rub-Impact Rotor System

The numerical modeling of rotor–stator rubbing in rotating machinery: a comprehensive review

Nonlinear Dynamics of a Rub-Impact Rotor Supported by Oil Film Bearings with an Elastic Stator

Rub-impact dynamic analysis of a dual-rotor system with bolted joint structure: Theoretical and experimental investigations

Detection of the Rubbing-Caused Impacts for Rotor–stator Fault Diagnosis Using Reassigned Scalogram

Experimental observation of nonlinear vibrations in a rub-impact rotor system