Abstract:Large gas turbines often utilize dual-rotor structures to improve efficiency. To facilitate manufacture and maintenance, the large rotor systems are typically constructed by connecting components made from different materials together through the bolted joint. In this work, a dynamic model of a dual-rotor system with bolted joint included in the high-pressure (HP) rotor is established based upon the finite element theory of Timoshenko beam element, as well as taking into account the bearing forces and fixed-point rubbing fault. To evaluate the influence of rubbing faults on the dynamic behavior of a dual-rotor system, this study analyzed the response characteristics of the rotor under the cases of the LP rotor and the HP rotor subjected to the rubbing fault, respectively. In order to further reveal the effect of bolted joint structure on the system response while rubbing fault occurs, piecewise linear bending stiffness is also considered in this study. The nonlinear vibration responses of the bolted joint dual rotor-bearing system are studied through numerical simulation. Effect of rotor–stator contact stiffness and the occurrence of rubbing faults at the low-pressure (LP) rotor and the HP rotor are investigated through frequency-amplitude curves, waterfall diagrams, time-domain responses, and bending stiffness of the bolted joint. The results indicate that the presence of rubbing faults, whether occurring at the LP rotor or the HP rotor, leads to a decrease in the critical speed. Furthermore, under a rubbing fault, the bending stiffness of the bolted joint enters the stiffness softening region earlier and exhibits a wider range, which is exacerbated with increased contact stiffness. This phenomenon is considered one of the main causes of system response instability. Finally, the experimental studies are carried out on a bolted joint dual-rotor test rig to validate the numerical simulation results.

Rub Fault Diagnostics by Dynamic Characteristics Analysis of a Multi-Disk Rotor System

DETERMINATION OF THE RUBBING LOCATION IN A MULTI-DISK ROTOR SYSTEM BY MEANS OF DYNAMIC STIFFNESS IDENTIFICATION

Research on Vibration Response of a Multi-Faulted Rotor System Using LMD-based Time-Frequency Representation

Experimental Investigation of Rotor Rubbing Faults

Nonlinear Dynamics of Rotor Rubbing against Rotor-Stator on Flexible Supports

Dynamic Characteristics and Experimental Research of a Two-Span Rotor-Bearing System with Rub-Impact Fault

Dynamic Characteristics Analysis of a Rotor–stator System under Different Rubbing Forms

Analysis and Identification of Rub-impact Fault between Rotor and Stator

Fixed-point Rubbing Fault Characteristic Analysis of a Rotor System Based on Contact Theory

Vibration characteristics of rotors with rub

Vibration investigation of rotor system with unbalance and blade-casing rubbing coupling faults

Method for diagnosing rub fault of rotor-stator based on differences of singularly values

Dynamic Characteristics Analysis of a Rod Fastening Rotor System Considering Contact Roughness

Research on the rubbing fault diagnosis of rotor shafts using the double-rotor test bench

Nonlinear Dynamic Behavior Analysis of Dual-Rotor-Bearing Systems with Looseness and Rub–Impact Faults

Response Analysis of a Dual-Disc Rotor System with Multi-Unbalances–multi-fixed-point Rubbing Faults

Rub-impact dynamic analysis of a dual-rotor system with bolted joint structure: Theoretical and experimental investigations

Stiffening effect of the rotor during the rotor-to-stator rub in a rotating machine

Detection of the Rubbing-Caused Impacts for Rotor–stator Fault Diagnosis Using Reassigned Scalogram

Vibration Response Analysis of Rubbing Faults on a Dual-Rotor Bearing System

Chaotic behavior of a rub rotor model