Abstract:Structural Health Monitoring, Ahead of Print. Rub-impact is a common nonlinear fault of the rotor system, occurring in rotating machines with radial clearance between the rotor and the stator, which may lead to serious consequences. Since the vibration response of rotor rub-impact is shown as multicomponent with time-varying characteristics of undulatory instantaneous frequency, it is desired to exploit advanced signal processing methods for rub-related feature excavation and failure diagnosis under complex noise interferences, which is of crucial significance to ensure the stable and efficient operation of the whole unit. This paper concerns the processing of acceleration signals and proposes a novel intrawave frequency modulation detection approach for structural rotor rubbing diagnosis based upon targeted component extraction and stochastic resonance enhancement. First, the acquired vibratory acceleration signal is converted into displacement signal via a two-stage integration strategy. Next, to extract the rotating frequency component of high information clarity for further time–frequency analysis from the multicomponent signal, an especially designed improved variational mode decomposition method based on the modified target frequency index is put forward, and the instantaneous frequency of the objective component is estimated. Then, the optimum stochastic resonance is leveraged for intrawave frequency modulation enhancement. Finally, the rotor rub-related symptom can be distinctly revealed and the diagnostic procedure can be performed. The effectiveness and superiority of the proposed rotor rub-impact diagnosis approach are demonstrated through both simulations and experiments, indicating that it is suitable to be implemented in practical applications, with high noise-resistance ability, and can efficiently extract the potential characteristics of rotor rub-impact malfunction from multicomponent signals.

On the Vibration of Rotor with Rotor/Stopper Rubbing

The Partial and Full Rubbing of a Flywheel Rotor–bearing–stop System

Investigation of Electromagnetic Forces Acting on Rotor Considering Modulation Effect of Surface-Mounted Pole Structure

Self-excited vibrations of a rigid rotor rubbing with the motion-limiting stop

Experimental Investigation of Rotor Rubbing Faults

Rubbing phenomena in rotor–stator contact

Radial Vibration Characteristics of a Double-overhung Rub Rotor

Nonlinear Vibration of Rotor Rubbing Stator Caused by Initial Perturbation

Experimental observation of nonlinear vibrations in a rub-impact rotor system

Analysis of Nonlinear Vibration Characteristics and Whirl Behavior of Dual-Rotor Systems with Inter-Shaft Rub Impact

Rub-impact Behavior Study of a Flywheel Rotor by Considering the Friction Coefficients Effect

Periodic, quasi-periodic and chaotic vibrations of a rub-impact rotor system supported on oil film bearings

Structural rotor rub-impact diagnosis under intricate noise interferences based on targeted component extraction and stochastic resonance enhancement

The Influence Of Damping Coefficient On Vibration Characteristic Of A Rub-Impact Rotor Under Axial Thrust

Experimental Study of Rotor-Boundary Impact and Rub

Radial and Torsional Vibration Characteristics of A Rub Rotor

Synchronous Vibration Control In A Flywheel Rotor System Supported By Active Magnetic Bearings

Coupling dynamics of pedestal looseness and impact-rub for rotor system with nonlinear support

Chaotic behavior of a rub rotor model

Dynamic Response of Rubbing Happening in A Flexible Rotor-Bearing System

Vibration investigation of rotor system with unbalance and blade-casing rubbing coupling faults