Abstract:Mid-infrared pulsed fiber laser with centered wavelength from 2 to 5 μm have attracted substantial attention owing to their potential applications in defence, laser microsurgery, material processing, nonlinear frequency conversion, etc. We demonstrated our recent achievements at 3 μm pulsed fiber lasers by utilizing Q-switching method. Firstly, a cascaded dual wavelength actively Q-switched Ho3+-doped ZBLAN fiber was reported by inserting an external electrically driven acoustic-optical modulator (AOM) into the cavity. The 3.0 μm and 2.07 μm pulse trains were achieved with a μs level time delay corresponding to the pulse energy of 29 μJ and 7 μJ, pulse duration of 380 ns and 260 ns, respectively. The narrower pulse width in this case compared to that in passively Q-switched fiber lasers can be attributed to the much higher modulation depth of AOM. Using a reversely designed semiconductor saturable mirror (SESAM) as the saturable absorber (SA), we presented a passively Q-switched Ho3+-doped ZBLAN fiber laser operating at ~2971 nm, the obtained maximum pulse energy of 6.65 μJ only limited by the maximum pump power was also the highest level from passively Q-switched fiber lasers at this wavelength range, and corresponding pulse repetition rate and duration were 47.6 kHz and 1.68 μs, respectively. Then using a Fe2+: ZnSe crystal with an initial transmission of 69 % as the SA, a passively Q-switched Ho3+-doped ZBLAN fiber laser operating at 2970.3 nm was also achieved. The obtained pulse duration and repetition rate were 1.92 μs and 62.74 kHz, respectively with an output power of 266 mW and a pulse energy of 4.24 μJ. The further performance improvements were possible because they were just limited by the maximum pump power. To sum up, the above achievements would be beneficial for further development of mid-infrared pulsed fiber lasers.

Widely Wavelength Tunable Gain-Switched Er^3+-doped ZBLAN Fiber Laser Around 28 Μm

Widely wavelength tunable gain-switched Er<sup>3+</sup>-doped ZBLAN fiber laser around 2.8 μm.

Widely Tunable Gain-Switched Er³⁺-Doped ZrF₄ Fiber Laser from 3.4 to 3.7 Μm

118 Nm-Wavelength-tunable Er3+-doped ZBLAN Passively Mode-Locked Fiber Laser

Widely tunable single-frequency Er-doped ZBLAN fiber laser with emission from 3.37 to 3.72 µm

Wavelength-tunable Passively Mode-Locked Mid-Infrared Er3+-doped ZBLAN Fiber Laser.

Gain-switched dysprosium fiber laser tunable from 2.8 to 3.1 μm.

Gain-Switched Er-Doped Fluoride Fiber Laser at ~3.75 μm

State-switchable and Wavelength-Tunable Gain-Switched Mid-Infrared Fiber Laser in the Wavelength Region Around 2.94 Μm.

Watt-level Gain-Switched Fiber Laser at 3.46 Μm.

High-peak-power and wavelength tunable acousto-optic Q-switched Er:ZBLAN fiber laser

3.5-Μm Gain-Switch Fiber Laser

Mid-infrared Er:ZBLAN Fiber Laser Reaching 3.68 Μm Wavelength

Wavelength-tunable spatiotemporal mode-locking in a large-mode-area Er:ZBLAN fiber laser at 2.8 µm

Versatile and widely tunable mid-infrared erbium doped ZBLAN fiber laser

34 Nm-Wavelength-tunable Picosecond Ho3+/Pr3+-codoped ZBLAN Fiber Laser.

Highly efficient actively Q-switched Er^3+-doped ZBLAN fiber laser operating around 2.8 μm using a La_3Ga_5SiO_14 electro-optical modulator

Widely Tunable Passively Q-switched Er 3+ -Doped ZrF 4 Fiber Laser in the Range of 3.4–3.7 Μm Based on a Fe 2+ :Znse Crystal

Q-switched Er3+/Dy3+ Codoped ZrF4 Fiber Laser: Continuously Tunable Pulse Generation from 3.06 to 3.62 Μm

Mid-infrared Pulsed Fiber Lasers Operating at 3μm Region

High Peak Power Actively Q-switched Mid-Infrared Fiber Lasers at 3 Μm