Abstract:Mode-locked mid-infrared (mid-IR) fiber lasers are of increasing interest due to their many potential applications in spectroscopic sensors, infrared countermeasures, laser surgery, and high-efficiency pump sources for nonlinear wavelength convertors. Er3+-doped ZBLAN (ZrF4-BaF2-LaF3-AlF3-NaF) fiber lasers, which can emit mid-IR light at 2.65-2.9 mu m through the transition from the upper energy level I-4(11/2) to the lower laser level I-4(13/2), have attracted much attention because of their broad emission range, high optical efficiency, and the ready availability of diode pump lasers at the two absorption peaks of Er3+ ions (975 nm and 976 nm). In recent years, significant progress on high power Er3+-doped ZBLAN fiber lasers has been achieved and over 20 watt cw output at 2.8 mu m has been demonstrated; however, there has been little progress on ultrafast mid-IR ZBLAN fiber lasers to date. We report a passively mode-locked Er3+-doped ZBLAN fiber laser in which a Fe2+:ZnSe crystal was used as the intracavity saturable absorber. Fe2+:ZnSe is an ideal material for mid-IR laser pulse generation because of its large saturable absorption cross-section and small saturation energy along with the excellent opto-mechanical (damage threshold similar to 2 J/cm(2)) and physical characteristics of the crystalline ZnSe host. A 1.6 m double-clad 8 mol% Er3+-doped ZBLAN fiber was used in our experiment. The fiber core has a diameter of 15 mu m and a numerical aperture (NA) of 0.1. The inner circular cladding has a diameter of 125 mu m and an NA of 0.5. Both continuous-wave and Q-switched mode-locking pulses at 2.8 mu m were obtained. Continuous-wave mode locking operation with a pulse duration of 19 ps and an average power of 51 mW were achieved when a collimated beam traversed the Fe2+:ZnSe crystal. When the cavity was modified to provide a focused beam at the Fe2+:ZnSe crystal, Q-switched mode-locked operation with a pulse duration of 60 ps and an average power of 4.6 mW was achieved. More powerful and narrower pulses are expected if the dispersion of the cavity can be properly managed.

118 Nm-Wavelength-tunable Er3+-doped ZBLAN Passively Mode-Locked Fiber Laser

Wavelength-tunable Passively Mode-Locked Mid-Infrared Er3+-doped ZBLAN Fiber Laser.

Widely Wavelength Tunable Gain-Switched Er^3+-doped ZBLAN Fiber Laser Around 28 Μm

Widely wavelength tunable gain-switched Er<sup>3+</sup>-doped ZBLAN fiber laser around 2.8 μm.

Watt-level Passively Mode-Locked Er^3+-doped ZBLAN Fiber Laser at 28 Μm

Watt-level passively mode-locked Er3+-doped ZBLAN fiber laser at 2.8 mu m

Widely tunable single-frequency Er-doped ZBLAN fiber laser with emission from 3.37 to 3.72 µm

Picosecond Passively Mode-Locked Mid-Infrared Fiber Laser

Passively continuous-wave mode-locked Er(3+)-doped ZBLAN fiber laser at 2.8 μm.

Widely Tunable Passively Q-switched Er 3+ -Doped ZrF 4 Fiber Laser in the Range of 3.4–3.7 Μm Based on a Fe 2+ :Znse Crystal

34 Nm-Wavelength-tunable Picosecond Ho3+/Pr3+-codoped ZBLAN Fiber Laser.

Mid-infrared Er:ZBLAN Fiber Laser Reaching 3.68 Μm Wavelength

Wavelength-tunable spatiotemporal mode-locking in a large-mode-area Er:ZBLAN fiber laser at 2.8 µm

High-peak-power and wavelength tunable acousto-optic Q-switched Er:ZBLAN fiber laser

Wideband Tunable, Carbon Nanotube Mode-Locked Fiber Laser Emitting at Wavelengths Around $3~\mu$ M

Versatile and widely tunable mid-infrared erbium doped ZBLAN fiber laser

Over 5-W Passively Q-Switched Mid-Infrared Fiber Laser With a Wide Continuous Wavelength Tuning Range

Wavelength-tunable passively mode-locked all-fiber laser at 1.5 μm

Tunable Fe^2+:ZnSe Passively Q-switched Ho^3+-doped ZBLAN Fiber Laser Around 3 Μm

Widely Tunable Gain-Switched Er³⁺-Doped ZrF₄ Fiber Laser from 3.4 to 3.7 Μm

Q-switched Er3+/Dy3+ Codoped ZrF4 Fiber Laser: Continuously Tunable Pulse Generation from 3.06 to 3.62 Μm