Abstract:This study addresses the axial compressive performance of welded hollow spherical (WHS) joints with external triangular ribs. External triangular ribs are able to postpone the local buckling of the joint during axial loading, and thus strengthen the compressive capacity of it. A simplified analytical model is proposed to elucidate the stress distribution on the hollow sphere of axial-loaded WHS joints with external triangular ribs. Then a simplified solution for the yield strength of axial-loaded WHS joints is deduced based on the elastic thin shell theory. The simplified solution indicates that the yield strength of WHS joints with external triangular ribs can be expressed by a coefficient related to the specifications of the ribs and the joints multiply by that of WHS joints without external ribs. Compression tests on 6 full-scale specimens of WHS joints with varied configurations of triangular ribs are conducted. It shows that the failure mode and the strength enhancement of the specimens vary as the specification of the triangular ribs change, and the triangular ribs enhance the strength of the joints up to 77 %. A refined FE model is established and calibrated against the findings from the experiments. Parametric studies on the design parameters which may affect the compressive response of the WHS joints with triangular ribs are fully investigated. It is shown that the compressive yield strength of the joint rises with the increase of the number, height and thickness of the triangular ribs, and decreases with the increase of the angle-of-elevation of the triangular ribs. It is also shown that the effect of the ratio of the diameter of the sphere to that of the steel tube on the compressive yield strength of the joint is much lighter than the others, and deemed as negligible. Regression analysis on the experimental and numerical data is carried out to obtain a practical formula for the compressive capacity of WHS joints with external triangular ribs. This formula is incorporated with the previously developed formula for the compressive capacity of WHS joints with external trapezoidal ribs, to form a general formula applicable for WHS joints with either external triangular ribs or external trapezoidal ribs.

Simplified Theoretical Solution of Circular Toroidal Shell with Ribs under Uniform External Pressure

Circumferential Folded Single-Layer Reticulated Spherical Shell and Simplified Calculation Method in Structure Static Analysis

Optimal Winding Conditions of Flat Steel Ribbon Wound Pressure Vessels with Controllable Stresses

NON-LINEAR STABILITY CRITICAL LOADS OF SINGLE-LAYER AND DOUBLE-LAYER RETICULATED SPHERICAL SHALLOW SHELLS BASED ON CONTINUUM ANALOGY METHOD

SIMPLIFIED CALCULATION METHOD AND EXPERIMENTAL RESEARCH ON PRESTRESSED FOLDED-PLANE RETICULATED SHELL

Buckling Strength of Tapered Cylindrical Shells under Partial Axial Compression: Effect of Circumferential Weld-Induced Imperfections

Compressive Performance of Welded Hollow Spherical Joints with External Triangular Ribs

Stress distributions and stiffness anisotropy of circumferentially corrugated shells under uniform external pressure

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Isogeometric Method for Buckling Prediction and Post-Buckling Analysis of Variable Stiffness Composite Underwater Pressure Shell

Finite Element Analysis of Tangential Rectangle Joint Pipe on the Shell of an Cyclone

A Simplified Method for Calculating the Stress of a Large Storage Tank Wall

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Limit pressure and design criterion of cylindrical pressure vessels with nozzles

Stress Analysis of Large Oil Storage Tanks Based on Combined Cylindrical Shell

On Instability Failure of Corroded Rings under External Hydrostatic Pressure

Research Of Weld On Axial Buckling Stress Of Multilayer Combined Cylindrical Shells

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

The mechanical behavior of cylindrical shell with composite corrugations under uniform and concentrated pressure

ELASTIC BUCKLING OF ELLIPTICAL CYLINDRICAL SHELLS UNDER EXTERNAL PRESSURE

Vibration and critical pressure analyses of functionally graded combined shells submerged in water with external hydrostatic pressure