Principle of Ethernet-serial Port Sever Based Microcontroller

Jianxiao Wang

2007-01-01

Abstract:This paper introduces a new method that transmit data transparently between Ethernet and serial interface.It makes the Ethernet connected with the microcomputer unit.Using this method,we can make every kind of non-computer automatic equipment which is online.

What problem does this paper attempt to address?

The serial communication system simulation based on proteus

Chen Jun

DOI: https://doi.org/10.3969/j.issn.1001-9227.2012.04.022

2012-01-01

Abstract:This paper studies the serial interface way of based on Proteus software through typical examples.It realizes the serial interface communication of the Microcomputer and MCU.
Design of TCP/IP Network Communication between Host Computer and PLC Based on Serial Server

Tang Jianxin,Ma Hao

DOI: https://doi.org/10.3969/j.issn.1000-3886.2005.05.017

2005-01-01

Abstract:This paper introduces the Network communication between host computer and PLC based on a new method of linking serial server,the communication principle to host computer and the design of freeport communication.The communication protocol uses a new mode which combines query mode and real time mode and index address which realizes the alterable length of data frame.
Real-time Data Transmission of the Digital Simulation System Based on Network

Shu-yue HONG,Hua-jun FENG,Xiao-zhong SHI

DOI: https://doi.org/10.3969/j.issn.1673-2103.2002.02.002

2002-01-01

Abstract:Based on the study of the digital real-time simulation system of relay testing, this paper aims at solving the real-time problem to meet the requirements of hard real-time and high data transmission speed while using WINDOWS as developing platform. From the viewpoint of real-time transmission of network, the schemes of real-time application utilizing real-time data transmission via network are advanced, realized and demonstrated.
The Implementation and Performance Analysis of an Ethernet Embedded System Based on a Microcontroller

刘康,王宣银

DOI: https://doi.org/10.3969/j.issn.1000-0682.2004.01.010

2004-01-01

Abstract:This paper presents an ethernet controller consisting of the RTL8019AS and the implementing of the TCP/IP in an embeded microcontroller system,which usually has a limit memory space.The remote data communication between the user and the RS-485 field bus has been realized in this system along with the analysis of its performance.
Implementation of Serial Communication between PLC and Single-chip Microcomputer

Cheng Liang,Lin Bin,Cha Lingzhi

DOI: https://doi.org/10.3969/j.issn.1000-3886.2006.03.013

2006-01-01

Abstract:This paper introduces serial communication between PLC and single-chip microcomputer with the example of S7-226 PLC and AT89S51 MCU.Detailed explanation of hardware configuration and program design in this communication system is given.The design project in paper has been applied successfully in automatic pill-filled machine.
Research on Energy Saving and Emission Reduction Technology Based on Field Communication and Embedded Control Computer Data Exchange Algorithm

Pingping Qian

DOI: https://doi.org/10.1088/1755-1315/632/5/052068

2021-01-01

IOP Conference Series: Earth and Environmental Science

Abstract:Abstract In addition to meeting the basic characteristics of traditional transactions, the concurrent control of embedded mobile real-time transactions should also focus on priority inversion, unnecessary transaction restart and global data consistency, performance of hybrid transaction systems, energy saving and emission reduction. When using traditional control algorithms, scheduling control is mainly based on data structure characteristics, and it is easy to cause data stack congestion. In order to solve the above problems, a stack scheduling control method of embedded data structure using multi-parameter neural network is proposed. Combined with the widely used switched Ethernet technology in defences, communications, aerospace, industrial control and other fields, a prototype of a star topology embedded software test system is introduced.
Study on the Real-Time Serial Communication Based on Windows

陈月斌,邬义杰,刘楚辉

DOI: https://doi.org/10.3969/j.issn.1001-2265.2003.12.003

2003-01-01

Abstract:Aiming at the real-time property of serial communication between upper and lower computer of distributed control system under Windows, based on the study on VxD work characteristic and the mechanism of serial communication, this paper describes the programming method of real-time serial communication,by using VtoolsD tool, which is good solution to the key technology of developing control system of precision machining.
Study on the Real-time Serial Communication Based on Virtual Device Driver in Win9x

冷洪滨,邬义杰

DOI: https://doi.org/10.3969/j.issn.1001-4551.2004.05.004

2004-01-01

Abstract:To meet the real-time request of serial communication between upper and under computer under Win9x, this paper studies the mechanism of serial communication and VxD, and presents the programming method of serial communication based on VxD using VtoolsD.
Design of Intelligent Serial Communication Terminal in Distributed Control System

YU Zhao-kai,YAN Gang-feng

DOI: https://doi.org/10.3969/j.issn.1004-4345.2011.04.043

2011-01-01

Abstract:To meet the needs of establishing a dynamic adjustable serial communication network,an intelligent serial communication terminal is designed using the method of automatic identification of communication baud rate and frame format in blind environment.After communication settings of host computer,the terminal can automatically identify and follow the communication setting of host computer and establish communication with host computer.Industrial application has proved that the intelligent serial communication terminal designed by this method enhances greatly the flexibility of serial communication with its stable and reliable operation and interference rejection.
EPA-based Open Network Control System

Dongqin Feng,Wenjun Huang,Jianxiang Jin,Jian Chu

DOI: https://doi.org/10.1109/icca.2003.1595168

2003-01-01

Abstract:The Ethernet is more and more used in the industrial environments. Because of the non-deterministic protocol of CSMA/CD, Ethernet is thought not to be suitable for the control of real time applications. With the worldwide application and development of Ethernet, its transmission rate is considered sufficiently high enough to estimate that all messages can be received inside a predefined temporal window. Especially, using Ethernet in industrial network will brings a lot of advantages: (1) consistency with the other communication systems installed in the enterprise; (2) employment of the same hardware all over the factory; (3) short cycle-times due to the high transmission speed; (4) large availability of chips implementing the MAC protocol, etc. In this paper, we first analyze the real-time capability of Ethernet and features of traffic for industrial network. Then, we propose some technologies for the design of an Ethernet-based real-time application. Finally, we present an EPA (Ethernet for Plant Automation)-based open network control system.
The Design and Realization of PLC Remote Monitoring and Diagnosing System

韩思亮,汤建新,马皓

DOI: https://doi.org/10.3969/j.issn.1000-0682.2005.01.007

2005-01-01

Abstract:This paper introduces PLC remote monitoring and diagnosing system based on a new network method of linking serial server.It also puts emphasis on the communication principle to host computer,realtime communication and the design of freeport communication and center server.
Real-time Bidirectional Data Transmission Based on USB Interface

Kuang Wang

2005-01-01

Abstract:The article designs a real-time bidirectional transmission channel.And it introduces the theory of the design,selects specific chip,introduces the hardware of the channel,and brings forward the method of designing USB firmware,driver,and application.
The Remote Fan Control Based on Real-Time Ethernet

XIE Mingwei,ZHU Rusong,GU Zhenghua

DOI: https://doi.org/10.3969/j.issn.1009-671x.2011.02.06

2011-01-01

Abstract:To overcome the bad real-time performance of remote control system usually used in industrial field,a method is given to implement remote control based on real-time Ethernet,which combines real-time Ethernet,virtual instrument and optic fiber transmission.The result of experiment indicates that the remote control system based on real-time Ethernet has high reliability,better real-time performance and stronger anti-jamming ability,compared with the common PLC remote control system.It has great value in the control of large industrial field.
The Research and Analysis of Embedded TCP/IP Protocol

Meng Li

2004-01-01

Abstract:This paper first discusses the Internet access schemes of embedded equipments.then analyzes the communication protocol hierarchy,the keys of main protocols in embedded TCP/IP protocol and provides the new ideas in software.Finally,it analyzes the store-problem of MCU and controlle-problem of the ethernet controller drivers in hardware
Construction of Ethernet Interface of Computerized Flat Knitting Machine Based on ARM7 and Uip

XU Jin-bao,XU Kai-yun,ZHU Hao

DOI: https://doi.org/10.3969/j.issn.1672-1616.2011.09.014

2011-01-01

Abstract:It shows the importance of Ethernet interface of computer control network touching flat knitting machine.Based on the technical request of computer control network touching flat knitting machine,it selects S3C44B0X as master control chip and RTL8019AS as Ethernet interface chip,designs the hardware circuits of control terminal.It uses TCP/IP protocol stack uIP to link the platform of S3C44B0X and builds the Ethernet interface.In the porting process,it improves the packet receiving mode and packet checksum algorithm,puts forward a macro named UIP_UDP_APPCALL() to implement UDP communication.It introduces the method of uIP communication with other hosts via TCP,UDP protocol.
Research of a New High-Performance Data-Collecting Transmissive System

干开峰,王俊,丁健

DOI: https://doi.org/10.3969/j.issn.1001-9227.2009.02.013

2009-01-01

Abstract:In this paper,a new scheme for data-collecting transmissive system is proposed.It consists of hardware and software.In the hardware,which is mainly maken up of S3C2410 microprocessor and CS8900A chip,data can be collected and transmitted to the remote server through the ethernet.In the software,which is based on μC /OS-Ⅱ real operating system and data encryption processing,the data transmission with the high performance,stability,timeliness and security is ensured and the intelligent online monitoring is realized.It has been shown that the system has high reliability,strong timeliness and good security through some applications.
Control of Wireless Network Communication for Industrial Robot Servo Systems

Meiliu Li,Guangjun Wang,Jinhua She,Zhentao Liu,Danyun Li

DOI: https://doi.org/10.23919/chicc.2018.8482671

2018-01-01

Abstract:To meet the needs of high speed and good environmental adaptability for data transmission in industrial robot servo systems, this paper presents a wireless transmission technology on a data acquisition control terminal. The system is based on STM32F103RET6 processor and reads cache data from the SRAM of FPGA in DMA method, and communicates with a WIFI chip, Marvell 88w8686, through the SDIO interface. A host computer segments and filters the data received by the WIFI chip and sends control commands back to STM32. The functions of the hardware and software of the system contains data compression and storage, wireless data transmission, data display, and control-command transmission. An experimental platform has been built. It carries out real-time transmission of 8-16 digits based on the TCP/IP protocol with expected performance.
Network Programming Technique and Its Realization Based on Socket

刘骏,颜钢锋

DOI: https://doi.org/10.3969/j.issn.1671-7147.2004.03.007

2004-01-01

Abstract:The paper introduces the process communication procedure and its specific realization between the client and server based on TCP protocol. Based on the introduction, the paper propose the methods and features of network socket programming using Delphi. An instance of file transfer and distant system control is also presented.
Design of embedded network interface based on ENC28J60

刘琼,朱志伟,周志光

DOI: https://doi.org/10.3969/j.issn.1008-0570.2008.14.124

2008-01-01

Abstract:A solution of ethernet interface based on the core of ENC28J60 and its architecture of hardware is illustrated. Following a brief introduction of the structure, functions and external connections of the ENC28J60.The solution how to make ENC28J60 communicate with Atmega16 are expatiated. This solution not only can reduce the cost but also can obtain the transmitted rate of 500Kbps,and can satisfy the requirements of controlling embedded system through Internet.
Real Time Characteristics of Ethernet and Its Improvement

Z Wang,YQ Song,JM Chen,YX Sun

DOI: https://doi.org/10.1109/wcica.2002.1020794

2002-01-01

Abstract:There is a growing interest in using Ethernet to support time constrained communication in process control, factory automation and other real-time applications. The paper first presents a comprehensive analysis of the temporal characteristics of traditional Ethernet and the improvements for them, then summarizes the interesting features offered by a switched Ethernet for supporting time constrained communication. Finally, the paper points that there is still lack of general means to handle the capability of switched Ethernet after investigating the QoS of switched Ethernet.

Principle of Ethernet-serial Port Sever Based Microcontroller

The serial communication system simulation based on proteus

Design of TCP/IP Network Communication between Host Computer and PLC Based on Serial Server

Real-time Data Transmission of the Digital Simulation System Based on Network

The Implementation and Performance Analysis of an Ethernet Embedded System Based on a Microcontroller

Implementation of Serial Communication between PLC and Single-chip Microcomputer

Research on Energy Saving and Emission Reduction Technology Based on Field Communication and Embedded Control Computer Data Exchange Algorithm

Study on the Real-Time Serial Communication Based on Windows

Study on the Real-time Serial Communication Based on Virtual Device Driver in Win9x

Design of Intelligent Serial Communication Terminal in Distributed Control System

EPA-based Open Network Control System

The Design and Realization of PLC Remote Monitoring and Diagnosing System

Real-time Bidirectional Data Transmission Based on USB Interface

The Remote Fan Control Based on Real-Time Ethernet

The Research and Analysis of Embedded TCP/IP Protocol

Construction of Ethernet Interface of Computerized Flat Knitting Machine Based on ARM7 and Uip

Research of a New High-Performance Data-Collecting Transmissive System

Control of Wireless Network Communication for Industrial Robot Servo Systems

Network Programming Technique and Its Realization Based on Socket

Design of embedded network interface based on ENC28J60

Real Time Characteristics of Ethernet and Its Improvement