Study on the Real-time Serial Communication Based on Virtual Device Driver in Win9x

冷洪滨,邬义杰

DOI: https://doi.org/10.3969/j.issn.1001-4551.2004.05.004

2004-01-01

Abstract:To meet the real-time request of serial communication between upper and under computer under Win9x, this paper studies the mechanism of serial communication and VxD, and presents the programming method of serial communication based on VxD using VtoolsD.

What problem does this paper attempt to address?

Study on the Real-Time Serial Communication Based on Windows

陈月斌,邬义杰,刘楚辉

DOI: https://doi.org/10.3969/j.issn.1001-2265.2003.12.003

2003-01-01

Abstract:Aiming at the real-time property of serial communication between upper and lower computer of distributed control system under Windows, based on the study on VxD work characteristic and the mechanism of serial communication, this paper describes the programming method of real-time serial communication,by using VtoolsD tool, which is good solution to the key technology of developing control system of precision machining.
Real-time Data Transmission of the Digital Simulation System Based on Network

Shu-yue HONG,Hua-jun FENG,Xiao-zhong SHI

DOI: https://doi.org/10.3969/j.issn.1673-2103.2002.02.002

2002-01-01

Abstract:Based on the study of the digital real-time simulation system of relay testing, this paper aims at solving the real-time problem to meet the requirements of hard real-time and high data transmission speed while using WINDOWS as developing platform. From the viewpoint of real-time transmission of network, the schemes of real-time application utilizing real-time data transmission via network are advanced, realized and demonstrated.
Design of Intelligent Serial Communication Terminal in Distributed Control System

YU Zhao-kai,YAN Gang-feng

DOI: https://doi.org/10.3969/j.issn.1004-4345.2011.04.043

2011-01-01

Abstract:To meet the needs of establishing a dynamic adjustable serial communication network,an intelligent serial communication terminal is designed using the method of automatic identification of communication baud rate and frame format in blind environment.After communication settings of host computer,the terminal can automatically identify and follow the communication setting of host computer and establish communication with host computer.Industrial application has proved that the intelligent serial communication terminal designed by this method enhances greatly the flexibility of serial communication with its stable and reliable operation and interference rejection.
Research on USB Data Transmission Technology Based on LabVIEW

程龙飞,何闻

DOI: https://doi.org/10.3969/j.issn.1001-3881.2009.07.036

2009-01-01

Abstract:The USB data transmission technology based on LabVIEW was studied.The USB interface circuit which core chip is PDIUSBD12 produced by PHILIPS,the firmware programming method of the USB interface circuit,and the specific method of compiling application which is based on the LabVIEW were introduced.The result in the data transmission test shows that it can realize the data transmission between superior monitor and inferior computer by using LabVIEW and USB interface.
Application of Device Driver in EPP_CAN Experimental Communication System

Qian Cao

2005-01-01

Abstract:EPP model parallel port and CAN bus are generally introduced. The definition and use of virtual device driver VxD are specified. Also, the application of VxD driver in the interface realization of EPP model parallel port and CAN bus is focused on. Combining with the VxD application, an EPP-CAN based experimental communication system is introduced. Using VxD driver, this system successfully realizes the interface of CAN bus and EPP model parallel port. It can well accomplish the information transmission between them and response interruptions in time, thus realizes the real-time net communications of CAN bus.
Progrmming of a Device Driver for VxWorks

李立志,张朝阳,陈文正

DOI: https://doi.org/10.3969/j.issn.1000-3428.2003.04.073

2003-01-01

Abstract:After describing the real time operating system VxWorks in brief, this paper discusses how to write a VxWorks device driver in a general fashion including writing an character-specific device driver and block device driver . The non-standard interface device driver is also discussed here . Moreover , it discusses what device driver is needed to implement in a gateway project and their implementations.
Design of TCP/IP Network Communication between Host Computer and PLC Based on Serial Server

Tang Jianxin,Ma Hao

DOI: https://doi.org/10.3969/j.issn.1000-3886.2005.05.017

2005-01-01

Abstract:This paper introduces the Network communication between host computer and PLC based on a new method of linking serial server,the communication principle to host computer and the design of freeport communication.The communication protocol uses a new mode which combines query mode and real time mode and index address which realizes the alterable length of data frame.
Realization of the dynamic signal analyzer driver using COM module

Fan Wei,Pan Hong,Xiong Sichang,Zheng Jie

2006-01-01

Abstract:In general,the driver of different virtual instrument development platform can not be exchanged,even for the same hardware.The idea of realizing the driver of virtual instrument development platform by COM component technology is researched,which solved the unacceptable issue of the driver.Furthermore,the hierarchy and developmental mode of COM driver are illustrated by using in Visual C + + IDE.
The Design and Realization of PLC Remote Monitoring and Diagnosing System

韩思亮,汤建新,马皓

DOI: https://doi.org/10.3969/j.issn.1000-0682.2005.01.007

2005-01-01

Abstract:This paper introduces PLC remote monitoring and diagnosing system based on a new network method of linking serial server.It also puts emphasis on the communication principle to host computer,realtime communication and the design of freeport communication and center server.
Design and Implementation of Virtual Test System Based on LabWindows/CVI

Liang Wang

2009-01-01

Abstract:VxWorks can not provide friendly graphical user interface like Windows system,and developing the graphical interface under VxWorks system has a high degree of difficulty and workload.According to the problems above,a useful method developed by LabWindows/CVI 8.5 is designed to test real-time simulation computer running on VxWorks.The method is successfully applied to the semi-physical simulation test for a certain type of plane,and it is proved useful in checking the I/O system of simulation computer.Quite a practical implementation is provided for diagnosing fault in I/O system for future.
Video Driver Development Based on V4L2

徐家,陈奇

2010-01-01

Abstract:In embedded system,especially with low system resources,good driver structural design can effectively reduce memory and CPU occupation,hence improve the system’s performance.V4L2 is a new framework for video device driver development under Linux,and a in-depth study on the running mechanism of V4L2 is given.By making full use of its properties,a V4L2 driver develop method is presented for video device based on reducing system resource consumption and promoting driver’s behavior,and its validity is proven by experiment.
The Study of Programming Design Methods in Serial Communication Based on C++ Builder 6

余昌盛,许力

DOI: https://doi.org/10.3969/j.issn.1001-4551.2004.07.005

2004-01-01

Abstract:COM is the one of the most important peripheral interfaces in computer; therefore it is significant to do the study of programming design methods in serial communication. In this paper we discuss the four programming design methods of serial communication on C~(++) Builder 6 platform: direct embedded assembler, Windows API functions, MSComm component based on the technique of ActiveX and Third-Party component SPComm. We also give the compared results of the four programming design methods in serial communication, and provide programming examples.
Real-time Bidirectional Data Transmission Based on USB Interface

Kuang Wang

2005-01-01

Abstract:The article designs a real-time bidirectional transmission channel.And it introduces the theory of the design,selects specific chip,introduces the hardware of the channel,and brings forward the method of designing USB firmware,driver,and application.
Design of Virtual Device System Based on DSP

刁红泉,张瑶瑶,颜钢锋

DOI: https://doi.org/10.3969/j.issn.1671-7147.2004.01.010

2004-01-01

Abstract:With the development of the computer technology and digital signal processing technology, virtual technology has become popular. Application of virtual technology in control domain is called virtual device. To verify the effect of the controller, on the basis of system model, the virtual device with approximate input-output characteristics is employed for the system's real-time simulation, achieving the aim of reducing on-spot debugging, enhancing controller's security and improving effect. This paper presents hardware and software designs of a virtual device using DSP chip-TMS320F240, TI Com. and verifies the simulation effect of virtual device through application example.
Design and Implementation of Virtual Parallel Port

HAN Feng,YANG Shi-yan,WANG Rui,LI Yi

DOI: https://doi.org/10.3969/j.issn.1000-7024.2005.04.071

2005-01-01

Abstract:A virtual parallel portscheme is proposed, which aims to solve the problem of getting print data for the application of wireless technologies to substitute forprintcableinprinters. The schemeadapts forvarious printers, which doesn't modifyprinter driver programs and hasn't any negative influence on system architecture. The implementation of virtual parallel port is introduced. Finally, the charac- teristics of virtual parallel port is summarized.
Serial Communication Design of Industrial Control System Based on Visual Basic6.0 and MX Software Package

Xiao Hua Sun,Li Yan,Zhi Yong Zhang,Fu Shun Wang

DOI: https://doi.org/10.4028/www.scientific.net/amr.765-767.1943

2013-01-01

Advanced Materials Research

Abstract:By analyzing the current serial communication design used in a popular monitor system composed of PC, GOT and PLC, introduced a new design and implementation plan of serial communication based on Vb and MX software pagekage. This system could solve the problem of managing complex communication protocol in current application, and achieved the efficient, stable and reliable communication under simple attachment. The system could not only have not to consider complex communication protocol but also need not to set up the D8120 PLC, and MX Component with other application such as GX Developer could use com port at the same time, so debug conveniently and programming high efficiency. In the actual application, No matter the accuracy and stability of communication were to achieve achieve industrial control system requirements.
High-Speed Network Communication Based on VxWorks Aux-Clock

WANG Gong-feng,XU Ren-xin,LI Cong,LI Xing,Chen Xing-lin

2012-01-01

Abstract:With the need of high speed and reliability requirement,the use of aux-clock of VxWorks and the sockets of windows based on message mechanism are discussed in this paper.With the communication rules provided,the transport requirements are sufficed.The experiment of this network shows that this design fulfils zero data loss,reaches the high speed and reliable network communication effect.
Communication Protocol and Realization for Temperature Controller of Simulated Platform in Extrem Environment

张建文,李世伦,叶树明,蒋凯

DOI: https://doi.org/10.3969/j.issn.1001-4551.2004.01.004

2004-01-01

Abstract:Based on Windows 2000 and VIsual C~(++), a highly reliable asynchronous communication for RS-485 is programmed by Windows API, which realizes the temperature detection and the parameters setting for temperature controller, in addition, clears the impulse interference by median-filter method in the course of data-transmission.
Implementation of a Kind of Remote Communication Control System Based on Serial Communication

Xiao Longhai

DOI: https://doi.org/10.3969/j.issn.1001-182X.2006.03.019

2006-01-01

Abstract:Remote control technique is in common use in Automation control fields.The serial communication is in widely used in remote control system.Delphi is a rapid develop tool which based on oriented object.The paper introduces the method and the step of serial communication in Delphi,include using Windows API functions,MSComm component and Async Professional component library,and gives an example.It analyzes the merits and shortcomings of every kind of method.
Network Programming Technique and Its Realization Based on Socket

刘骏,颜钢锋

DOI: https://doi.org/10.3969/j.issn.1671-7147.2004.03.007

2004-01-01

Abstract:The paper introduces the process communication procedure and its specific realization between the client and server based on TCP protocol. Based on the introduction, the paper propose the methods and features of network socket programming using Delphi. An instance of file transfer and distant system control is also presented.

Study on the Real-time Serial Communication Based on Virtual Device Driver in Win9x

Study on the Real-Time Serial Communication Based on Windows

Real-time Data Transmission of the Digital Simulation System Based on Network

Design of Intelligent Serial Communication Terminal in Distributed Control System

Research on USB Data Transmission Technology Based on LabVIEW

Application of Device Driver in EPP_CAN Experimental Communication System

Progrmming of a Device Driver for VxWorks

Design of TCP/IP Network Communication between Host Computer and PLC Based on Serial Server

Realization of the dynamic signal analyzer driver using COM module

The Design and Realization of PLC Remote Monitoring and Diagnosing System

Design and Implementation of Virtual Test System Based on LabWindows/CVI

Video Driver Development Based on V4L2

The Study of Programming Design Methods in Serial Communication Based on C++ Builder 6

Real-time Bidirectional Data Transmission Based on USB Interface

Design of Virtual Device System Based on DSP

Design and Implementation of Virtual Parallel Port

Serial Communication Design of Industrial Control System Based on Visual Basic6.0 and MX Software Package

High-Speed Network Communication Based on VxWorks Aux-Clock

Communication Protocol and Realization for Temperature Controller of Simulated Platform in Extrem Environment

Implementation of a Kind of Remote Communication Control System Based on Serial Communication

Network Programming Technique and Its Realization Based on Socket