The Research and Analysis of Embedded TCP/IP Protocol

Meng Li

2004-01-01

Abstract:This paper first discusses the Internet access schemes of embedded equipments.then analyzes the communication protocol hierarchy,the keys of main protocols in embedded TCP/IP protocol and provides the new ideas in software.Finally,it analyzes the store-problem of MCU and controlle-problem of the ethernet controller drivers in hardware

What problem does this paper attempt to address?

The Implementation and Performance Analysis of an Ethernet Embedded System Based on a Microcontroller

刘康,王宣银

DOI: https://doi.org/10.3969/j.issn.1000-0682.2004.01.010

2004-01-01

Abstract:This paper presents an ethernet controller consisting of the RTL8019AS and the implementing of the TCP/IP in an embeded microcontroller system,which usually has a limit memory space.The remote data communication between the user and the RS-485 field bus has been realized in this system along with the analysis of its performance.
The Design of Embedded Socket Software

ZHANG Han,FENG Dong-qin

DOI: https://doi.org/10.3969/j.issn.1000-0682.2007.02.016

2007-01-01

Abstract:This paper makes a study of the principle of an embedded UDP stack socket,and presents the design conception of the socket tasks run in the kernel of an embedded operation system along with the real-time application run in the socket task to ensure its real-time demand.These applications perform in an interface mode,which is different from the kernel mode and the user's mode in the embedded operation system.
Research on Energy Saving and Emission Reduction Technology Based on Field Communication and Embedded Control Computer Data Exchange Algorithm

Pingping Qian

DOI: https://doi.org/10.1088/1755-1315/632/5/052068

2021-01-01

IOP Conference Series: Earth and Environmental Science

Abstract:Abstract In addition to meeting the basic characteristics of traditional transactions, the concurrent control of embedded mobile real-time transactions should also focus on priority inversion, unnecessary transaction restart and global data consistency, performance of hybrid transaction systems, energy saving and emission reduction. When using traditional control algorithms, scheduling control is mainly based on data structure characteristics, and it is easy to cause data stack congestion. In order to solve the above problems, a stack scheduling control method of embedded data structure using multi-parameter neural network is proposed. Combined with the widely used switched Ethernet technology in defences, communications, aerospace, industrial control and other fields, a prototype of a star topology embedded software test system is introduced.
Analysis on Industrial Ethernet and Real-time Ethernet

Feng Dongqin,Jin Jianxiang,Chu Jian

2005-01-01

Abstract:In this paper,the characteristics of industrial Ethernet and Real-time Ethernet are analyzed.Then,some industrial Ethernet protocols included in IEC standards are introduced.
Design and Realization of Information Appliance Based on Embedded TCP/IP Protocol

Zhou Zhiguang,Bao zushang,Zhu Zhiwei,Liu Dingliang

DOI: https://doi.org/10.3969/j.issn.1008-0570.2007.17.022

2007-01-01

Abstract:This article discusses the way of connecting the embedded system based on micro controller 51 with the Internet by RTL8019AS.this micro controller systems embedded TCP/IP protocol is protocol in the paper has many advantages, such as lower cost, smaller area of hardware, and easier to use. Can for the home electricity internet access, and the other embedded applies the long range control provide a kind of new good solution.
EPA-based Open Network Control System

Dongqin Feng,Wenjun Huang,Jianxiang Jin,Jian Chu

DOI: https://doi.org/10.1109/icca.2003.1595168

2003-01-01

Abstract:The Ethernet is more and more used in the industrial environments. Because of the non-deterministic protocol of CSMA/CD, Ethernet is thought not to be suitable for the control of real time applications. With the worldwide application and development of Ethernet, its transmission rate is considered sufficiently high enough to estimate that all messages can be received inside a predefined temporal window. Especially, using Ethernet in industrial network will brings a lot of advantages: (1) consistency with the other communication systems installed in the enterprise; (2) employment of the same hardware all over the factory; (3) short cycle-times due to the high transmission speed; (4) large availability of chips implementing the MAC protocol, etc. In this paper, we first analyze the real-time capability of Ethernet and features of traffic for industrial network. Then, we propose some technologies for the design of an Ethernet-based real-time application. Finally, we present an EPA (Ethernet for Plant Automation)-based open network control system.
A Dynamic Model of TCP/IP Networks

王彬,戴连奎,吴铁军

DOI: https://doi.org/10.3969/j.issn.1007-0249.2004.01.017

2004-01-01

Abstract:With the rapid development of Internet, congestion becomes one of the major problems to be solved in network communication. Many congestion control schemes have been figured out to ensure the robustness and stability of TCP/IP networks. They are usually classified into two categories: end-to-end, such as TCP control algorithm, and Active Queue Management (AQM) schemes. However, most of these schemes are based on expert experience, not on the network dynamic characteristics. For this reason, the purpose of this paper is to analyze TCP/IP networks in control theory. Specifically, a fluid-based data transmission dynamic model is built for a simple TCP/IP network with a single bottle-neck link, then this simple network is decomposed into several basic parts with respective dynamic models. The model of the whole network is thus built from synthesizing models of sub- networks mentioned above. Based on the proposed dynamic model, performances of TCP/IP networks can be estimated and new algorithms for congestion control can be developed. This model is well validated by comparing the analytical results with the NS simulation results.
Pure end-to-end TCP approaches in wireless network

CHEN Zuo-tian,ZHOU Jin-fang,CHEN Kang-sheng

2005-01-01

Journal of Computer Applications

Abstract:The schemes to solve the high bit error problem in wireless networks were discussed. Aiming to improve the performance of TCP protocal in mobile environments, two typical TCP models of the pure end-to-end approaches, TCPW and TCP-Real, were researched. The pure end-to-end schemes have the advantage of preserving the end-to-end semantics of TCP protocol. Simulation results with different bit error conditions of these protocols reveal an evident improvement in terms of TCP performance in relative to others, especially when the bit error rate is high.
The Ethernet's Applying in the Motor Controlling System

Xian-wei MA,Jun-hua MA

DOI: https://doi.org/10.3969/j.issn.1005-2895.2006.03.030

2006-01-01

Abstract:This paper discusses the characteristics of the Ethernet and the TCP/IP protocol,and analyses the braw foreground of its applying in the industrial control system.And it also supplies an idiographic project of its applying.
Ethernet Communication Design of Embedded System Based on ARM

SHI Guang-zhi,LIU Bo,JIANG Xiu-jie,LIU Cheng

DOI: https://doi.org/10.3969/j.issn.2095-6835.2010.32.033

2010-01-01

Abstract:This paper introduces an embedded communication system based on ARM.The use of LPC2368 microcontroller chip and DP83848 physical chip are conducted to design the hardware,the transplant process of μC/OS-Ⅱ is accomplished to establish development environment,based on which designs the TCP/IP protocol and implements socket communication.The solution realizes data transmission of embedded communication system and has been applied successfully in the data collection and communication system of electric instrument.
Design of Embedded Network Control System Based on LwIP Protocol Stack

Chao Zhang,Zhichao Wang,Yan Lin

2019-01-01

Abstract:In the paper, the hardware circuit design and software framework design of an industrial embedded network control system based on LwIP protocol stack and STM32 family micro controller are introduced.DP83848 is used as the network control chip in the design.A kind of retransmission mechanism is designed, ensuring real-time and reliable data transmission between field data and remote monitoring devices.
Real Time Characteristics of Ethernet and Its Improvement

Z Wang,YQ Song,JM Chen,YX Sun

DOI: https://doi.org/10.1109/wcica.2002.1020794

2002-01-01

Abstract:There is a growing interest in using Ethernet to support time constrained communication in process control, factory automation and other real-time applications. The paper first presents a comprehensive analysis of the temporal characteristics of traditional Ethernet and the improvements for them, then summarizes the interesting features offered by a switched Ethernet for supporting time constrained communication. Finally, the paper points that there is still lack of general means to handle the capability of switched Ethernet after investigating the QoS of switched Ethernet.
DESIGN OF AN LWIP-BASED DUAL NETWORK INTERFACE COMMUNICATION SCHEME

Yerong Xu,Minglei Bao,Ming Li

DOI: https://doi.org/10.3969/j.issn.1000-386x.2016.09.030

2016-01-01

Abstract:Aiming at the requirement of low cost Ethernet communication of embedded system,we propose to move the open source protocol stack lwIP into μC /OS system to construct a dual network interface communication scheme.The inner mailbox and semaphore of operating system emulation layer is designed to use the exclusive memory block.The application layer is designed as the connecting layer and the protocol layer.The connecting layer loops through all the stable TCP connections.The protocol layer is responsible for parsing the upper application protocol.Experimental results show that the application of this scheme can achieve reliable Ethernet communication needs.
Research of Embedded Internet and Home Gateway Technology

DONG Wei,YANG Shi-yuan

DOI: https://doi.org/10.3969/j.issn.1001-3695.2005.06.079

2005-01-01

Abstract:The development status of embedded Internet technology is introduced. A classification of popular related technologies as well as the analysis for the structure and feature of a typical embedded Internet system is given.The hardware and software structure, as well as the development and application mode and some problems encountered in the design process is presented. Aiming at the large time delay in network communication, an asynchronous invoking method to eliminate the stagnancy of Web interface is given. At last, the development trend of Embedded Internet technology is analyzed.
Construction of Ethernet Interface of Computerized Flat Knitting Machine Based on ARM7 and Uip

XU Jin-bao,XU Kai-yun,ZHU Hao

DOI: https://doi.org/10.3969/j.issn.1672-1616.2011.09.014

2011-01-01

Abstract:It shows the importance of Ethernet interface of computer control network touching flat knitting machine.Based on the technical request of computer control network touching flat knitting machine,it selects S3C44B0X as master control chip and RTL8019AS as Ethernet interface chip,designs the hardware circuits of control terminal.It uses TCP/IP protocol stack uIP to link the platform of S3C44B0X and builds the Ethernet interface.In the porting process,it improves the packet receiving mode and packet checksum algorithm,puts forward a macro named UIP_UDP_APPCALL() to implement UDP communication.It introduces the method of uIP communication with other hosts via TCP,UDP protocol.
Study and Implementation of Protocol Model of WLAN Access Controller Based on Embedded Systems

Xiang-dong YANG,Pei-dong WANG,Xiang-hua REN,Ying JIANG

DOI: https://doi.org/10.3969/j.issn.1007-2683.2005.01.025

2005-01-01

Abstract:To solve problem that the wireless communication needs more and more the multi-work, based on WLAN access controller which adopts embedded Linux system, this article adopts the hardware structure and the software solution plan, and constructs the implemention module of the Bluetooth protocol in embedded Linux systems. The article introduces implementation of key technology-the transform between the TCP/IP protocol and the Bluetooth protocol each other and HCI interface. Trough being tested, the system can succeed in the wireless 'appliance accessing to the network, and run stably, and the data max-length which transmits between L2CAP and its last protocol increases from 127 byte to 1514 byte, so the system communication efficience is improved well.
Research on Application Platform of Embedded Internet Based on IPv6

WANG Peng-an,HUANG Yong-feng,LI Xin

2006-01-01

Abstract:Based on the development status of embedded Internet technology and the main problem of embedded internet technology in IPv4 network,a solution to embedded internet based on IPv6 protocol was proposed.The framework of TCP/IPv6 protocol suite was designed in detail,and aim at the characteristics of embedded internet technology,message queue and memory allocation mechanism which combine static allocation and dynamic allocation quoted improve the TCP/IPv6 protocol suite.In the situation of short of system resource seriously,a universal embedded application platform was realized,which supports multi-user control the device at real time.
Research into Embedded Micro Internetworking Technology and its Implemetation

陈利锋,刘博勤,涂时亮,陈章龙

DOI: https://doi.org/10.3969/j.issn.1002-137X.2001.10.026

2001-01-01

Computer Science

Abstract:Based on the existing Internet technology, this article introduces some new technologies con-cerning the connection between embedded devices and Internet , which are designed for electronic de-vices. The prospects for the application of this technology are proved to be good and vast.
Tcp veno: end-to-end congestion control over heterogeneous networks

Chengpeng Fu,Liew Soung Chang

2001-01-01

Abstract: The success of the Internet can be attributed directly to the large number of useful applications running on it. TCP/IP has been the underlying communication protocols enabling these applications. Despite the widespread deployment of the protocols, TCP/IP continues to be a hot research topic among R&D teams in the academia as well as the industry. Much of the recent work has been centered on adapting the protocols for use in wireless environments because of its ease of deployment, convenience...
Control of Wireless Network Communication for Industrial Robot Servo Systems

Meiliu Li,Guangjun Wang,Jinhua She,Zhentao Liu,Danyun Li

DOI: https://doi.org/10.23919/chicc.2018.8482671

2018-01-01

Abstract:To meet the needs of high speed and good environmental adaptability for data transmission in industrial robot servo systems, this paper presents a wireless transmission technology on a data acquisition control terminal. The system is based on STM32F103RET6 processor and reads cache data from the SRAM of FPGA in DMA method, and communicates with a WIFI chip, Marvell 88w8686, through the SDIO interface. A host computer segments and filters the data received by the WIFI chip and sends control commands back to STM32. The functions of the hardware and software of the system contains data compression and storage, wireless data transmission, data display, and control-command transmission. An experimental platform has been built. It carries out real-time transmission of 8-16 digits based on the TCP/IP protocol with expected performance.

The Research and Analysis of Embedded TCP/IP Protocol

The Implementation and Performance Analysis of an Ethernet Embedded System Based on a Microcontroller

The Design of Embedded Socket Software

Research on Energy Saving and Emission Reduction Technology Based on Field Communication and Embedded Control Computer Data Exchange Algorithm

Analysis on Industrial Ethernet and Real-time Ethernet

Design and Realization of Information Appliance Based on Embedded TCP/IP Protocol

EPA-based Open Network Control System

A Dynamic Model of TCP/IP Networks

Pure end-to-end TCP approaches in wireless network

The Ethernet's Applying in the Motor Controlling System

Ethernet Communication Design of Embedded System Based on ARM

Design of Embedded Network Control System Based on LwIP Protocol Stack

Real Time Characteristics of Ethernet and Its Improvement

DESIGN OF AN LWIP-BASED DUAL NETWORK INTERFACE COMMUNICATION SCHEME

Research of Embedded Internet and Home Gateway Technology

Construction of Ethernet Interface of Computerized Flat Knitting Machine Based on ARM7 and Uip

Study and Implementation of Protocol Model of WLAN Access Controller Based on Embedded Systems

Research on Application Platform of Embedded Internet Based on IPv6

Research into Embedded Micro Internetworking Technology and its Implemetation

Tcp veno: end-to-end congestion control over heterogeneous networks

Control of Wireless Network Communication for Industrial Robot Servo Systems