Abstract:Self‐assembly and nonsolvent‐induced phase separation (SNIPS) of block copolymers and solvents enable the fabrication of integral‐asymmetric, isoporous membranes. Using large‐scale particle simulations, the dependence of the membrane morphology on structural, thermodynamic (e.g., incompatibility between matrix‐forming block and nonsolvent), kinetic (e.g., vitrification threshold), and process parameters (e.g., duration of EISA) is predicted. Examining the top layer and substructure, the findings are verified through experiment. The self‐assembly and nonsolvent‐induced phase separation (SNIPS) process of block copolymers and solvents enables the fabrication of integral‐asymmetric, isoporous membranes. An isoporous top layer is formed by evaporation‐induced self‐assembly (EISA) and imparts selectivity for ultrafiltration of functional macromolecules or water purification. This selective layer is supported by a macroporous bottom structure that is formed by nonsolvent‐induced phase separation (NIPS) providing mechanical stability. Thereby the permeability/selectivity tradeoff is optimized. The SNIPS fabrication involves various physical phenomena—e.g., evaporation, self‐assembly, macrophase separation, vitrification – and multiple structural, thermodynamic, kinetic, and process parameters. Optimizing membrane properties and rationally designing fabrication processes is a challenge which particle simulation can significantly contribute to. Using large‐scale particle simulations, it is observed that 1) a small incompatibility between matrix‐forming block of the copolymer and nonsolvent, 2) a glassy arrest that occurs at a smaller polymer concentration, or 3) a higher dynamical contrast between polymer and solvent results in a finer, spongy substructure, whereas the opposite parameter choice gives rise to larger macropores with an elongated shape. These observations are confirmed by comparison to experiments on polystyrene (PS)‐block‐poly(4‐vinylpyridine) (P4VP) diblock copolymer membranes, varying the chemical nature of the coagulant or the temperature of coagulation bath.

Study on Diffusion-Limited and Reaction Aggregation Dynamics Model in PVDF Membrane Formation Process by NIPS Method

Effect of solvent concentration on development of macrovoids of PVDF phase-diversion membranes

Influence of additives on phase separation process of PVDF solution and membrane morphology

Polymorphism in Porous Poly(vinylidene Fluoride) Membranes Formed Via Immersion Precipitation Process

Preparation of Porous PVDF Membrane Via Thermally Induced Phase Separation with Diluent Mixture of DBP and DEHP

Mechanism of PVDF Membrane Formation by NIPS Revisited: Effect of Precipitation Bath Nature and Polymer–Solvent Affinity

Fluid simulation of different solvents and additives for the preparation of PVDF blended membranes by NIPS method

Multiscale Simulation on the Membrane Formation Process Via Thermally Induced Phase Separation Accompanied with Heat Transfer

INFLUENCE OF ALCOHOL-BASED NONSOLVENTS ON THE FORMATION AND MORPHOLOGY OF PVDF MEMBRANES IN PHASE INVERSION PROCESS

Phase inversion simulation of polymer PVDF membrane based on a fluid model

Ternary Phase-Field Simulations of the Skin-Sublayer Structures in Poly(vinylidene fluoride) Microporous Membranes Prepared by a Nonsolvent-Induced Phase Separation

Dissipative Particle Dynamics Simulation on the Membrane Formation of Polymer–solvent System Via Nonsolvent Induced Phase Separation

Model Simulation of Solvent Profile in the Preparation of PVDF Membrane and the Mechanism of Macrovoid Formation

Novel multiscale simulations on the membrane formation via hybrid induced phase separation process based on dissipative particle dynamics

Preparation of Lateral Flow PVDF Membrane via Combined Vapor- and Non-Solvent-Induced Phase Separation (V-NIPS)

Investigation on the membrane formation process of polymer–diluent system via thermally induced phase separation accompanied with mass transfer across the interface: Dissipative particle dynamics simulation and its experimental verification

An Anisotropic Immerse Precipitation Process for the Preparation of Polymer Membranes

PVDF hollow fiber formation via modified NIPS method: Evolution elucidation of phase separation mechanism, structure and properties of membrane with coagulation strength varied

Toward Predicting the Formation of Integral‐Asymmetric, Isoporous Diblock Copolymer Membranes

PVDF membranes for membrane distillation prepared by VIPS – A combined study of artificial water channel effectiveness and membrane performance prediction

A New Insight into the Membrane-Supported Interfacial Polymerization Via Poisson Distribution