Abstract:Poly(vinylidene fluoride) (PVDF) membranes possessing interconnected bicontinuous structures with superior mechanical properties and improved hydrophilicity were obtained from PVDF/N,N-dimethylacetamide (DMAc)/Tween 80/water systems via non-solvent induced phase separation (NIPS) with 60 °C and ambient temperature casting solution. Tween 80/H2O mixtures were adopted as dopant; water/ethanol (50:50, mass ratio) and ethanol were chosen as coagulants. The effects of process parameters in terms of variations in dopant contents, casting solution temperatures, and coagulant compositions on the phase inversion process and performance of the resultant membranes were investigated. During the demixing process, water diffused from the interior of Tween 80 reverse micelles, resulting in an accelerated precipitation rate and surface segregation process of the polar head groups of Tween 80. The high temperature of the casting solution contributed to enhancing the diffusion rate of liquid–liquid demixing on crystallization. The coagulant compositions changed the liquid–liquid and solid–liquid demixing dynamics of the casting solutions. Ethanol coagulant contributed to crystallization of PVDF/DMAc/Tween 80/water systems prior to liquid–liquid demixing. This delayed demixing process favored the formation of porous foliage-type top structures with fibril or lath bicontinuous fine structure of membrane bulk, increasing flux, and significant hydrophilicity improvement. Casting solutions in water/ethanol coagulant exhibited a less delayed demixing process with both liquid–liquid demixing and crystallization, resulting in formation of fine structure in the form of strings or stripes and limited hydrophilicity improvement. The predominant typical α- and β-type crystallinity in PVDF was attributed to the existence of dopants, the high temperature of the casting solution, and water/ethanol coagulant. This was consistent with the superior mechanical properties of the corresponding PVDF membrane. The newly developed hydrophilic PVDF membranes with superior mechanical properties and low-fouling of bovine serum albumin (BSA) are anticipated to be suitable not only for wastewater treatment, but also for bioseparation.

Fluid simulation of different solvents and additives for the preparation of PVDF blended membranes by NIPS method

Effect of solvent concentration on development of macrovoids of PVDF phase-diversion membranes

The Polymer-rich Phase Solidification Process of PVDF-PVP-DMAc-H2O Solution

Influence of additives on phase separation process of PVDF solution and membrane morphology

Influence of Solvents on the PVDF Membrane Properties

Effect of Different Additives on Morphology and Properties of Poly(Vinylidene Fluoride) Membrane

INFLUENCE OF ALCOHOL-BASED NONSOLVENTS ON THE FORMATION AND MORPHOLOGY OF PVDF MEMBRANES IN PHASE INVERSION PROCESS

Model Simulation of Solvent Profile in the Preparation of PVDF Membrane and the Mechanism of Macrovoid Formation

Ternary Phase-Field Simulation of Poly(vinylidene fluoride) Microporous Membrane Structures Prepared by Nonsolvent-Induced Phase Separation with Different Additives and Solvent Treatments

Morphology and Formation Mechanism of Poly(Vinylidene Fluoride) Membranes Prepared with Immerse Precipitation: Effect of Dissolving Temperature

Novel multiscale simulations on the membrane formation via hybrid induced phase separation process based on dissipative particle dynamics

Investigation of Polyvinylidene Fluoride Membranes Prepared by Using Surfactant OP-10 Alone or with a Second Component, As Additives, Via the Non-Solvent-Induced Phase Separation (NIPS) Process

Preparation and modification of PVDF membrane via VIPS method for membrane distillation

Microstructures and Properties of PVDF Membranes: Effect of the Solvent

Ternary Phase-Field Simulations of the Skin-Sublayer Structures in Poly(vinylidene fluoride) Microporous Membranes Prepared by a Nonsolvent-Induced Phase Separation

Phase inversion simulation of polymer PVDF membrane based on a fluid model

PREPARATION AND PERFORMANCE OF PVDF MEMBRANES FABRICATED BY PVDF-SOLVENT-NON-SOLVENT-ADDTIVE SYSTEMS

Preparation of Polyvinylidene Fluoride (pvdf) Membranes Via Nonsolvent Induced Phase Separation Process Using A Tween 80 and H2o Mixture As an Additive

Multiscale Simulation on the Membrane Formation Process Via Thermally Induced Phase Separation Accompanied with Heat Transfer

Characterization and Preparation of Poly(vinylidene Fluoride) (PVDF) Microporous Membranes with Interconnected Bicontinuous Structures Via Non-Solvent Induced Phase Separation (NIPS)

Mechanism of PVDF Membrane Formation by NIPS Revisited: Effect of Precipitation Bath Nature and Polymer–Solvent Affinity