Abstract:Abstract Poly(vinylidene fluoride) (PVDF) ultrafiltration (UF) membrane was prepared by vapor and non-solvent-induced phase separation (VNIPS) process, and the relationships between preparation conditions, phase separation behaviors and membrane structures were discussed. The phase diagram was generated by cloud point titration, the effects of environmental relative humidity, air exposure time and casting solution temperature on the structure and performance of the resulted membrane were investigated. The addition of polyvinylpyrrolidone (PVP) additives to the casting solution made the system thermodynamically unstable and led the turbidity curve shift toward the solvent/non-solvent axis. The experimental results showed that both average pore size and porosity increased with higher relative humidity. When the relative humidity increased from 35 to 85%, the mean pore size increased from 35 to 70 nm. The effect of exposure time on membrane structure was related to the air environment. It was found that under low temperature and low humidity conditions, exposure time had little effect on membrane structure. When the relative humidity was 75%, the mean pore size and distribution increased with the exposure time extension from 1.0 to 30 s. The mean pore size of the membrane could be reduced by reducing the relative humidity. When the temperature of the casting solution increased, the membrane pore size reached maximum at 80 °C, and the spherulite on the surface of the membrane decreased. The spherulite morphology almost disappeared when the temperature of the casting solution reached 120 °C. In addition, with the increase in the casting solution temperature, large pores appeared in the sub-layer of the membrane, which gradually widened the pore distribution, leading to the decrease in the tensile strength. The preparation condition was optimized as low temperature of casting solution, low humidity and low temperature of the environment. The fabrication process showed the potential for scaling-up production of the PVDF UF membrane by the VNIPS technique.

Ternary Phase-Field Simulation of Poly(vinylidene fluoride) Microporous Membrane Structures Prepared by Nonsolvent-Induced Phase Separation with Different Additives and Solvent Treatments

Ternary Phase-Field Simulations of the Skin-Sublayer Structures in Poly(vinylidene fluoride) Microporous Membranes Prepared by a Nonsolvent-Induced Phase Separation

Effect of solvent concentration on development of macrovoids of PVDF phase-diversion membranes

Ternary Phase Field Model and Characterization of Water/nmp/polysulfone Membrane Prepared by Non-Solvent Induced Phase Separation

Preparation of porous PVdF membrane via thermally induced phase separation using sulfolane

Preparation of Porous PVDF Membrane Via Thermally Induced Phase Separation with Diluent Mixture of DBP and DEHP

Influence of Solvents on the PVDF Membrane Properties

Fluid simulation of different solvents and additives for the preparation of PVDF blended membranes by NIPS method

Preparation and Characterization of Microporous PVDF Membrane by Thermally Induced Phase Separation from a Ternary Polymer/solvent/non-Solvent System

Phase inversion simulation of polymer PVDF membrane based on a fluid model

Microstructure of Microporous Polyvinylidene Fluoride Membrane Prepared Via Thermally Induced Phase Separation

Fabrication of a PVDF membrane with tailored morphology and properties via exploring and computing its ternary phase diagram for wastewater treatment and gas separation applications

Thermally Induced Phase Separation of Poly(vinylidene Fluoride)/diluent Systems: Optical Microscope and Infrared Spectroscopy Studies

Multiscale Simulation on the Membrane Formation Process Via Thermally Induced Phase Separation Accompanied with Heat Transfer

PVDF hollow fiber formation via modified NIPS method: Evolution elucidation of phase separation mechanism, structure and properties of membrane with coagulation strength varied

An Anisotropic Immerse Precipitation Process for the Preparation of Polymer Membranes

Formation of a Bicontinuous Structure Membrane of Polyvinylidene Fluoride in Diphenyl Carbonate Diluent Via Thermally Induced Phase Separation

Effect of Preparation Conditions on the Morphology, Polymorphism and Mechanical Properties of Polyvinylidene Fluoride Membranes Formed Via Thermally Induced Phase Separation

Poly(vinylidene fluoride) membranes prepared via nonsolvent induced phase separation combined with the gelation

Preparation of PVDF membrane via synergistically vapor and non-solvent-induced phase separation

Effects of Nucleating Agents on the Morphologies and Performances of Poly(Vinylidene Fluoride) Microporous Membranes Via Thermally Induced Phase Separation