Abstract:The mass transfer in the shear controllable synthesis process of nano-sized particles using a swirling vortex flow reactor is investigated. This type of a reactor is able to generate a strong 'Rankine vortex-like' flow with a great shear gradient in the radial direction, trapping the synthesised aggregated nano-particles into the vortex core to form aggregation. The aggregated particles are further agglomerated to form larger particles with high uniformity under the action of turbulent shear and subsequent mass transfer due to engulfment occurred in the turbulent eddies. The mass transfer is enhanced by engulfment between the slabs of the liquid streams tangentially entering into the reactor while the local shear in the turbulent eddies with the length scales down to the Kolmogorov scale shape the particles, yielding well spherical morphology and narrower size distribution. In addition, the mass transfer performance can be further improved by intensifying the local turbulent shear by applying the ultrasound to the synthesis process. The instantaneous collapse of cavitation bubbles in the vortex due to the introduction of ultrasound results in intensified micro-turbulent streaming. The particle characteristics, chemical reaction and mass transfer performance are found to be correlated with the local turbulence characteristics in the vortex. The mass transfer can be characterised using the film refresh model via the Sherwood number by considering the agglomerated particles response to the turbulent eddies. Both numerical simulation and experimental results clearly indicate the existence of the correlation in synthesis of aggregated nano-particles in swirling vortex reactor between the mass transfer and turbulence shear by using ultrasound irradiation.

Study on the Hydroxyl Synthesis in Circulating Slurry Reactors

Influence of Slurry Velocity and Concentration Distributions on Fischer-Tropsch Synthesis in Slurry Bubble Column Reactor

Numerical Study on the Process of Chemical Looping Hydrogen Production with Multiple Circulating Fluidized Bed Reactors

Hydrodynamics study and industrial applications of slurry reactors

An Investigation on Characteristics of Coal–water Slurry Prepared from the Solid Residue of Plasma Pyrolysis of Coal

Shear Turbulence Controllable Synthesis of Aggregated Nano-Particles Using a Swirling Vortex Flow Reactor Assisted by Ultrasound Irradiation

Liquid-phase preparation of CuO/ZrO2 catalyst used in slurry reactors and its catalytic activity for CO hydrogenation

Study on the Methanol Synthesis in Slurry Reactors

Kinetic Study of Hydrodesulfurization of Coker Gas Oil in a Slurry Reactor

Development of Centrifugal Coating Device to Load CuZnZr/γ-Al2O3 Catalyst on Porous Substrates for Methanol Steam Reforming

Investigation of hydrodynamics and mass transfer in an internal loop airlift slurry reactor integrating mixing and separation

Synergy Study for Plasma-Facilitated $\hbox{c}_{2} \hbox{h}_{4}$ Selective Catalytic Reduction of $\hbox{no}_{x}$ over $\Hbox{ag}/\gamma\hbox{-}\Hbox{al}_{2}\hbox{o}_{3}$ Catalyst

Activation of Peroxymonosulfate by CoS2 Loaded Air-Laid Cloth for Rapid Degradation of Organic Pollutants in a Shallow Continuous Flow Reactor

Promotion effect of Fe–Cu catalyst for the hydrogenation of CO2 and application to slurry reactor

Process Intensification in Pneumatically Agitated Slurry Reactors

Investigation of Hydrogenation and Mass Transfer Performance in Micropacked Beds with Highly Active Monolithic Catalysts

High-Speed Circulation Flow Platform Facilitating Practical Large-Scale Heterogeneous Photocatalysis

A novel liquid-phase technology for the preparation of slurry catalysts

Recirculation of activated sludge for coagulant synthesis under hydrothermal conditions

Hydrodynamics and mass transfer coefficient in three-phase air-lift reactors containing activated sludge

Influences of fluid physical properties, solid particles, and operating conditions on the hydrodynamics in slurry reactors