Abstract:With the dramatic increase in the international oil price, gas-to-liquid processes of Fischer-Tropsch (FT) synthesis, methanol synthesis, and dimethyl ether (DME) synthesis have become increasingly important and received much attention from both academic and industrial interests. The slurry reactor has the advantages of simple construction, excellent heat transfer performance, online catalyst addition and withdrawal, and a reasonable interphase mass transfer rate with low energy input, which make it very suitable for gas-to-liquid processes. However, its multiphase flow behaviors are very complex and the multiphase reactor has some remarkable scale-up effects; therefore, extensive studies are still needed for the development and design of a high-performance slurry reactor. This article gives a state-of-the-art review of the recent studies on the slurry reactor for gas-to-liquid processes. The influences of the superficial gas velocity, operating pressure and temperature, solid concentration, column dimensions, and gas distributor are discussed. Some recent developments in the liquid-solid separation in a slurry reactor are also summarized. The concept of using internals to intensify the mass transfer and improve the hydrodynamics is discussed based on both experimental results and theoretical analysis. Modeling and simulations of the gas-liquid and gas-liquid-solid flows are briefly reviewed, with focus on the new trend of coupling the population balance model (PBM) into the computational fluid dynamics (CFD) framework to describe the complex bubble behaviors and gas-liquid interphase interactions. The results of a 3000 ton/year pilot plant for DME synthesis are given, showing that the slurry reactor has promising applications in gas-to-liquid processes.

Hydrodynamics study and industrial applications of slurry reactors

Influence of Slurry Velocity and Concentration Distributions on Fischer-Tropsch Synthesis in Slurry Bubble Column Reactor

Studies on hydrodynamics of slurry turbulent bubble column(Ⅰ) Gas holdup and its radial distribution

Hydrodynamics in a Novel Gas-Liquid Cocurrent Bubble Reactor and its CFD Simulation

Influences of fluid physical properties, solid particles, and operating conditions on the hydrodynamics in slurry reactors

Studies in Gas-Liquid-solid Slurry Reactors

Slurry Reactors For Gas-To-Liquid Processes: A Review

Bubble Size “bimodal” Distribution Enhances Mixing and Mass Transfer in Slurry Bubbling Column Reactor

Process Intensification in Pneumatically Agitated Slurry Reactors

STUDY ON THE HYDRODYNAMICS CHARACTERISTICS OF EXTERNAL-LOOP AIRLIFT SLURRY REACTORS

Investigation of hydrodynamics and mass transfer in an internal loop airlift slurry reactor integrating mixing and separation

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

Study on the Hydroxyl Synthesis in Circulating Slurry Reactors

Hydrodynamic performance and structural optimization of a slurry bubble column with vertical tube internals

Hydrodynamics and mass transfer coefficient in three-phase air-lift reactors containing activated sludge

Hydrodynamics of a Slurry Airlift Reactor at High Solid Concentrations

A REVIEW ON THE APPLICATION OF EXPANDED GRANULAR SLUDGE BED(EGSB)REACTOR

Hydrodynamic Characteristics of Internal-Loop Granular Sludge Bed Nitrifying Reactor

Heterogeneous catalysis in multi-stage fluidized bed reactors: From fundamental study to industrial application

Hydrodynamics research of wastewater treatment bioreactors

Hydrodynamic Behavior of Three-Phase Airlift Loop Slurry Reactor