Abstract:An incremental analog-to-digital converter (I-ADC) with chopper stabilization (CHS) and self-calibration techniques is presented to meet the requirements of high resolution,low power consumption and small area for measuring devices of ultra-low-frequency signals.The I-ADC has the function of reset operation to avoid pattern noise caused by ultra-low-frequency signals.A first-order architecture is adopted for the I-ADC to reduce power consumption and chip area,and to achieve 14-bit resolution by increasing certain conversion time.The chopper stabilization technique is employed to eliminate the influence of amplifier's low-frequency noise and offset on the I-ADC's precision,and power-on self-calibration is employed to eliminate the systematic offset of the I-ADC.The circuit of the I-ADC and the layout of the modulator are designed with the DongBu 0.5 μm BCD technology.Simulation results in an input range of -156.25～156.25 mV show that the maximum absolute conversion error of the I-ADC is 21 μV,the maximum errors of differential nonlinearity and integral nonlinearity are 0.12 and 0.21 bit,respectively,and the average current consumption of the modulator is only 20 μA.The modulator occupies a chip area of only 150 μm × 310 μm.The proposed I-ADC achieves 14 bit resolution,which is required by ultra-low-frequency signal measuring systems,such as lithiumion battery coulometer,and has significant advantages of low power consumption and small area.

Application of Series ADC MAX111 in Data-Collecting System

Design of a Novel 8-Bit 0.35-&Amp;#x00b5;m BiCMOS Pipelined ADC

High-accuracy mass data acquisition and storage system based on single-chip microcomputer

Characteristic and Application of High Speed A/D Converter MAX12557

High Precision Data Collector Based on PIC Single Chip

Functions and Application of A/D Converters MAX125

Design of Low Power Data Collecting System

Design of Four-Channel High Precision Data Acquisition System with USB Interface

Design on High Precision, Multi-channel Data Acquisition System with AD7738

Application of ARM I~2C Bus Interface Module in Data Acquisition

Design and Implementation of Sensor Data Recording System

Incremental Analog-to-Digital Converter with High Resolution and Low Power for Measurement of Ultra-Low-Frequency Signals

Development of Temperature Collecting System Based on A/D Converter MAX1415

A Data Acquisition System in Intelligent Environmental Monitoring Device for Industrial Field

Design of a High Speed Data Acquisition System Based on DSP and MAX1420

Principle and Application of the Programmble Multi-Channels ADC THS1206

Application of ADC AT84AD001 in 2 GHz signal collection system

An A/D Converting Technology with High Precision,Low Cost and Multiple Measuring Range

Design of Data Acquisition System Based on TMS320VC5402 and TLV1578

Design of Real-time Temperature Monitoring System for Lead Acid Battery

Data acquisition system based on LabVIEW for array sensors