Abstract:High-resolution ($>$ 100dB SNDR), kHz-BW ADCs are required by emerging Io $\top$ and smart sensing applications. These ADCs are desired for their high efficiency, but low cost and ease of integration are also required, especially to be compatible with the advanced CMOS processes that the loT processor prefers. The state-of-the-art solutions in this scenario, such as the zoom ADC [1], the DT or CT-DSM [2]–[3], and the SAR ADC [4] and its noise-shaping variants [5], have already achieved great energy efficiency with >180dB FOMs. However, most of them are large in area, and rely heavily on the analog performance of old CMOS technologies with high supply voltages. In this work, we propose a new architecture that combines the counting ADC and CT-incremental-DSM (CT-IDSM) in a zoom ADC framework. The proposed architecture is not only power efficient, but also compact in area, highly digital, and friendly to process down-scaling. It operates at Nyquist sampling, supporting single-shot conversion and channel multiplexing. Besides this, it provides a high-impedance input with full-scale common-mode rejection, allowing direct driving by many signal sources. Fabricated in 28nm CMOS, the prototype zoom-incremental-counting (ZIC) ADC is measured to have 103dB SNDR at 20kSa/s, consuming 475 $\mu$ W from a 0.9V supply. The resulting 176dB FOMs is comparable to the state-of-the-art designs. It occupies only 0.014mm2, which is a magnitude or two smaller than most reported ADCs with $>$ 90dB SNR.

Incremental Analog-to-Digital Converter with High Resolution and Low Power for Measurement of Ultra-Low-Frequency Signals

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A 10-Bit 250-KS/s 1.24-uW SAR ADC for IoT Sensors with Energy-Efficient Comparator.

A Front-End Circuit With 16-Channel 12-Bit 100-Ksps Rc-Hybrid Sar Adc For Industrial Monitoring Application

A Low-Power Inverter-Based ΣΔ Analog-to-digital Converter for Audio Applications

A Low-power High-resolution Band-pass Sigma-delta ADC for Accelerometer Applications

A High-Performance, Low-Power Σ Δ ADC for Digital Audio Applications

A Fully Dynamic 4-Channel 13b Simultaneous Sampling Incremental ΔΣ ADC Using Cascoded Floating-Inverter-Amplifier and Code Division Multiplexing Technique

A 65-Nm Low-Power High-Linearity ΣΔ ADC for Audio Applications

Research and Implementation of A Low-power High-linearity Audio ΣΔ ADC In 65nm Process

A Low Power Cyclic ADC Design for a Wireless Monitoring System for Orthopedic Implants

A 24-Bit Sigma-Delta ADC with Configurable Chopping Scheme.

A 1-V 23-Μw 88-Db DR Sigma-Delta ADC for High-Accuracy and Low-Power Applications.

A 13-Bit, Low-Power, Compact Adc Suitable for Sensor Applications

A 0.04-Mm2 0.9-Mw 71-Db SNDR Distributed Modular AS ADC with VCO-based Integrator and Digital DAC Calibration

A 0.014mm2 10Khz-Bw Zoom-Incremental-Counting ADC Achieving 103db SNDR and 100db Full-Scale CMRR

An ultra-low-power extended counting ADC For large scale sensor arrays

A 10.12μw 101.98Db-Sndr Three-step Incremental Analog-to-Digital Converter

A 95-Db DR Second Order Incremental ΣΔ ADC for Multi-Channel Healthcare Application

A 455 Nw 220 Fj/conversion-Step 12 Bits 2 Ks/s SAR ADC for Portable Biopotential Acquisition Systems

An 8 Bit 12 MS/s Asynchronous Successive Approximation Register ADC with an On-Chip Reference