Abstract:An incremental analog-to-digital converter (I-ADC) with chopper stabilization (CHS) and self-calibration techniques is presented to meet the requirements of high resolution,low power consumption and small area for measuring devices of ultra-low-frequency signals.The I-ADC has the function of reset operation to avoid pattern noise caused by ultra-low-frequency signals.A first-order architecture is adopted for the I-ADC to reduce power consumption and chip area,and to achieve 14-bit resolution by increasing certain conversion time.The chopper stabilization technique is employed to eliminate the influence of amplifier's low-frequency noise and offset on the I-ADC's precision,and power-on self-calibration is employed to eliminate the systematic offset of the I-ADC.The circuit of the I-ADC and the layout of the modulator are designed with the DongBu 0.5 μm BCD technology.Simulation results in an input range of -156.25～156.25 mV show that the maximum absolute conversion error of the I-ADC is 21 μV,the maximum errors of differential nonlinearity and integral nonlinearity are 0.12 and 0.21 bit,respectively,and the average current consumption of the modulator is only 20 μA.The modulator occupies a chip area of only 150 μm × 310 μm.The proposed I-ADC achieves 14 bit resolution,which is required by ultra-low-frequency signal measuring systems,such as lithiumion battery coulometer,and has significant advantages of low power consumption and small area.

An A/D Converting Technology with High Precision,Low Cost and Multiple Measuring Range

A Front-End Circuit With 16-Channel 12-Bit 100-Ksps Rc-Hybrid Sar Adc For Industrial Monitoring Application

High Speed and High Precision Integral A/D Convertor Based on DPWM

Dual ADC High-precision AD Conversion Based on Linear Fitting

Method of adjustable precision ADC based on ADC and DAC

Design on High Precision, Multi-channel Data Acquisition System with AD7738

Design of digital multi-meter auto-measurement system

Design of A/D Converter Circuit with High Precision Based on CPLD

Incremental Analog-to-Digital Converter with High Resolution and Low Power for Measurement of Ultra-Low-Frequency Signals

A 10-bit 30-MS/s 50mW pipelined A/D converter

2.5-V1 MS/s 12-Bit Successive Approximation Analog-to-Digital Converter

A 10-bit 20-Msample/s 49mW CMOS pipelined A/D converter

High Precision A/D Conversion Circuit Design Based on FPGA

Technical Review on Novel and High Performance A/D Converters

Optimization of Precision and Speed in ADCP

18-Bit A/D Converter AD7674 and Its Application

Discuss of A/D Converter

Design and Implementation of a High-Precision and Low-Cost 10-Bit Digital-to-Analog Converter

Study of High-Speed Digital-to-Analog Converter Based on BiCMOS Technology

Design and Implementation of the A/D Conversion Circuit for the High-Accuracy Ultrasonic Flowmeter

Design of an High Performance and Price Ratio A/D, D/A Conversion Circuit