Abstract:ABSTRACT Biodegradable polymer foams are attracting extensive attention in both academic and industrial fields. In this study, an emerging biodegradable polymer, poly(propylene carbonate) (PPC), was compounded with nano calcium carbonate (nano‐CaCO 3 ) and foamed via supercritical carbon dioxide for the first time. Four concentrations of nano‐CaCO 3 , 1, 3, 5, and 10 wt %, were used and the thermal properties of PPC/nano‐CaCO 3 composites were investigated. The glass‐transition temperature and thermal decomposition temperature of the PPC/nano‐CaCO 3 composites increased with the addition of nano‐CaCO 3 . The morphologies of the PPC/nano‐CaCO 3 composites and the rheological results showed that homogeneous dispersions of nano‐CaCO 3 and percolated nano‐CaCO 3 networks were achieved at a nano‐CaCO 3 content of 3 wt %. Therefore, the finest cell diameter (3.13 μm) and highest cell density (6.02 × 10 9 cells/cm 3 ) were obtained at the same nano‐CaCO 3 content. The cell structure dependences of PPC and PPC with a nano‐CaCO 3 content of 3 wt % (PPC‐3) foams on the foaming pressure and temperature were investigated as well. The results suggested that the cell structure of PPC‐3 was more stable at different foaming conditions due to the networks of nano‐CaCO 3 . Moreover, the change in pressure was more influential on the cell structure than the temperature. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132 , 42248.

Study on Continuous Extrusion Foaming of PP/PS/Nano-clay with Supercritical CO_2

Study on Extrusion Foaming of Polypropylene with Supercritical CO2 As Foaming Agent

In Situ Polymerization of Poly(methyl Methacrylate)/clay Nanocomposites in Supercritical Carbon Dioxide

Study on the Foaming Behaviors of PBS and its Modification with PA6IcoT Assisted by scCO2

Microcellular Foaming of Polypropylene/Clay Nanocomposites with Supercritical Carbon Dioxide

Study on Extrusion Foaming of Polypropylene/Polydimethylsiloxane Blends

Dual Role of PDMS on Improving Supercritical CO2 Foaming of Polypropylene: CO2-philic Additive and Crystallization Nucleating Agent

Producing Microporous PMMA with Supercritical CO2 and the Research on Its Properties

Study on Foaming Properties of PLA/NCC Microcellular Foam Materials

Producing microporous PMMA with supercritical CO 2 and the research on its properties

Effect of Foaming Temperature on Cell Structure of Foamed Polypropylene Using Supercritical CO2

Preparation of Poly(propylene Carbonate)/nano Calcium Carbonate Composites and Their Supercritical Carbon Dioxide Foaming Behavior

Experiment and Simulation of Foaming Injection Molding of Polypropylene/nano-Calcium Carbonate Composites by Supercritical Carbon Dioxide

Fabrication of Polystyrene/nano‐caco3 Foams with Unimodal or Bimodal Cell Structure from Extrusion Foaming Using Supercritical Carbon Dioxide

An insight into different phenomena involved in continuous extrusion foaming of biodegradable poly(lactic acid)/expanded graphite nanocomposites

The effect of nano‐clay filler addition on the foaming and mechanical properties of polypropylene

13X Zeolite As Difunctional Nucleating Agent Regulating the Crystal Form and Improving the Foamability of Blocked Copolymerized Polypropylene in Supercritical CO 2 Foaming Process

Controlled Foaming of Polycarbonate/polymethyl Methacrylate Thin Film with Supercritical Carbon Dioxide

Microcellular Injection Molded Polylactic Acid/poly (Ε-Caprolactone) Blends with Supercritical CO2: Correlation Between Rheological Properties and Their Foaming Behavior

Batch Foam Processing of Polypropylene/Polydimethylsiloxane Blends

Preparation and Supercritical CO2 Foaming of Modified Nanocrystalline Cellulose Reinforced Polylactic Acid Bionanocomposites