Abstract:Polymer nanocomposite foams have received considerable attention because of their potential use in advanced applications such as bone scaffolds, food packaging, and transportation materials due to their low density and enhanced mechanical, thermal, and electrical properties compared to traditional polymer foams. In this study, silica nanofillers were used as nucleating agents and supercritical carbon dioxide as the foaming agent. The use of nanofillers provides an interface upon which CO 2 nucleates and leads to remarkably low average cell sizes while improving cell density (number of cells per unit volume). In this study, the effect of concentration, the extent of surface modification of silica nanofillers with CO 2 -philic chemical groups, and supercritical carbon dioxide process conditions on the foam morphology of poly(methyl methacrylate), PMMA, were systematically investigated to shed light on the relative importance of material and process parameters. The silica nanoparticles were chemically modified with tridecafluoro-1,1,2,2-tetrahydrooctyl triethoxysilane leading to three different surface chemistries. The silica concentration was varied from 0.85 to 3.2% (by weight). The supercritical CO 2 foaming was performed at four different temperatures (40, 65, 75, and 85°C) and between 8.97 and 17.93 MPa. By altering the surface chemistry of the silica nanofiller and manipulating the process conditions, the average cell diameter was decreased from 9.62 ± 5.22 to 1.06 ± 0.32 μ m, whereas, the cell density was increased from 7.5 ± 0.5 × 10 8 to 4.8 ± 0.3 × 10 11 cells/cm 3 . Our findings indicate that surface modification of silica nanoparticles with CO 2 -philic surfactants has the strongest effect on foam morphology.

Fabrication of Polystyrene/nano‐caco3 Foams with Unimodal or Bimodal Cell Structure from Extrusion Foaming Using Supercritical Carbon Dioxide

Study on the Foaming Behaviors of PBS and its Modification with PA6IcoT Assisted by scCO2

Extrusion Foaming Of Lightweight Polystyrene Composite Foams With Controllable Cellular Structure For Sound Absorption Application

Factors affecting the microstructure of a fine ceramic foam

Controlling Foam Morphology of Poly(methyl methacrylate) via Surface Chemistry and Concentration of Silica Nanoparticles and Supercritical Carbon Dioxide Process Parameters

Controlled Foaming of Polycarbonate/polymethyl Methacrylate Thin Film with Supercritical Carbon Dioxide

Preparation and Density Control of Pmma Microcellular Foams Via Supercritical Carbon Dioxide Foaming

The relationship between cellular microstructure and the mechanical properties of styrene/methyl methacrylate copolymer‐silica nanocomposite foams prepared by a supercritical CO2 blowing agent

Controlling cellular morphology by supercritical carbon dioxide

A Comparative Study of the Effect of Multidimensional Carbon Fillers on Polystyrene Using Supercritical Carbon Dioxide Foaming

Bimodal Cellular Structure Evolution in PBAT Foams Incorporated by Carbon Nanotubes and Graphene Nanosheets

Study on Extrusion Foaming of Polypropylene with Supercritical CO2 As Foaming Agent

Insight into the Influence of Properties of Poly(Ethylene-co-octene) with Different Chain Structures on Their Cell Morphology and Dimensional Stability Foamed by Supercritical CO2

Utilization of supercritical CO2 for controlling the crystal phase transition and cell morphology of isotactic polybutene-1 foams

Fabrication of Poly(butylene succinate)/Carbon Black Nanocomposite Foams with Good Electrical Conductivity and High Strength by a Supercritical CO2 Foaming Process

Unprecedented cell structure variation in multilayered alternating PS/PMMA foams

Study on the Foaming Behaviors of PBS and Its Modification with PA6IcoT Assisted by scCO 2

Research on the Tensile Properties of Microcellular PS with Supercritical CO2

Preparation and Supercritical CO2 Foaming of Modified Nanocrystalline Cellulose Reinforced Polylactic Acid Bionanocomposites

Ultrasound and H2O assisted scCO2 foaming technology for preparation of PS/PMMA composite foams with ultra-lightweight and super thermal-insulation

Effect of crystalline transformation on supercritical CO 2 foaming and cell morphology of isotactic polybutene-1