Abstract:Styrene/methyl methacrylate copolymer‐silica nanocomposite foams were prepared using supercritical CO2 as blowing agent, and the relationships between their cellular microstructure and mechanical properties were investigated. Styrene/methyl methacrylate (St/MMA) copolymer‐silica nanocomposite foams were prepared using supercritical CO2 as blowing agent, and the relationships between their cellular microstructure and mechanical properties were investigated. The effects of nanosilica content, size, and surface chemistry on the foam's microstructure and properties were examined. Dispersion and distribution of silica nanoparticles with different surface chemistry in St/MMA copolymer nanocomposites were discussed. To determine the most suitable copolymer composition for incorporating silica nanoparticles, some operating conditions such as temperature and pressure were primarily examined to study their effects on the microstructure of resulting foams. In compressive mechanical properties of final foams, a considerably high value was obtained for the compressive strength of the foams of up to 9.5 MPa. The prepared low‐density (below 0.2 g/cm3) St/MMA copolymer microcellular foams can be used in green lost foam iron casting processes. Highlights Styrene/methyl methacrylate copolymer‐silica nanocomposite foams were prepared via supercritical CO2. Foams' cell size was changed by changing silica nanoparticle surface chemistry and size. The uniform cellular microstructure was achieved by nanosilica size increment. Increasing nanoparticle size improved the foam's mechanical properties. Low‐density foams were achieved for potential application in lost foam casting.

Research on the Tensile Properties of Microcellular PS with Supercritical CO2

Effect of Melt Viscosity on the Cell Morphology and Properties of Poly(lactic Acid) Foams

Preparation and Density Control of Pmma Microcellular Foams Via Supercritical Carbon Dioxide Foaming

Extrusion Foaming Of Lightweight Polystyrene Composite Foams With Controllable Cellular Structure For Sound Absorption Application

Mechanical properties of microcellular and nanocellular silicone rubber foams obtained by supercritical carbon dioxide

Insight into the Influence of Properties of Poly(Ethylene-co-octene) with Different Chain Structures on Their Cell Morphology and Dimensional Stability Foamed by Supercritical CO2

Controlled Foaming of Polycarbonate/polymethyl Methacrylate Thin Film with Supercritical Carbon Dioxide

Controlling cellular morphology by supercritical carbon dioxide

Microcellular processing and relaxation of poly(ether ether ketone)

A Comparative Study of the Effect of Multidimensional Carbon Fillers on Polystyrene Using Supercritical Carbon Dioxide Foaming

Study on Extrusion Foaming of Polypropylene with Supercritical CO2 As Foaming Agent

Microcellular Injection Molded Polylactic Acid/poly (Ε-Caprolactone) Blends with Supercritical CO2: Correlation Between Rheological Properties and Their Foaming Behavior

Effect of Plasticizer on the Morphology and Foaming Properties of Poly(vinyl alcohol) Foams by Supercritical CO2 Foaming Agents

Preparation, Characterization, and Mechanical Properties of Microcellular Poly(Aryl Ether Ketone) Foams

Influence of Cell Wall Material and Cell Numbers on Mechanical Properties of Closed-Cell Aluminum Foams

Microcellular foams simultaneous reinforcing and toughening strategy of combining nano-fibrillation network and supercritical solid-state foaming

Microcellular Thermoplastic Polyurethanes and Their Flexible Properties Prepared by Mold Foaming Process with Supercritical CO2

Batch foaming of ultra-high molecular weight polyethylene with supercritical carbon dioxide: Influence of temperature and pressure

Modeling and Experimental Validation of Cell Morphology in Microcellular-Foamed Polycaprolactone

The relationship between cellular microstructure and the mechanical properties of styrene/methyl methacrylate copolymer‐silica nanocomposite foams prepared by a supercritical CO2 blowing agent

Experimental Research on the Mechanical Properties of Tailing Microcrystalline Foam Glass