Abstract:Tailings sand is the dam-building material of the tailings dam accumulation sub-dam, and its mechanical properties directly affect the safety and stability of the whole tailings dam. With the improvement of mineral sorting technology, the content of fine and ultrafine particles in the tailings gradually increases, which will affect the mechanical strength of tailings accumulation sub-dam. To improve the settling effect of tailings accumulation in the Chengchao iron ore mine (China), the effect of iron tailings flocculation and settling law on the mechanical properties of tailings sand was studied. Polymerized iron sulfate (PFS) as an inorganic polymer flocculant, compared with the traditional flocculant, has a stronger flocculation and adsorption capacity, is widely used in drinking water, industrial wastewater, and domestic sewage treatment, is an anionic polyacrylamide (APAM-800) for polymer compounds, mainly divided into nonionic, cationic, and anionic three, and is commonly used mine flocculant at home and abroad. Through different flocculants, PFS, and APAM-800 compound flocculation and settling experiments, the effect of the flocculant-dosing scheme on the settling rate and turbidity of clarified liquid was determined, and the change in tailings consolidation shear strength of the best dosing scheme was measured. The experimental results showed that the settling rate of iron tailings was the fastest when PFS was used in combination with APAM-800 at 1.2 g L−1 and 0.20 g·L−1 dosages, respectively. The direct shear test results showed that the internal friction angle of tailings sand increased by 2.18°, the cohesion increased by 5.814 kPa, and the shear resistance of flocculated settled tailings increased, which can effectively improve the safety factor of tailings sand pile sub-dam.

Analysis on Energy Saving of FeS_2 of the Flotation Metal Tailing in the Process of Cement Calcining

Experimental study on utilization of metallic tailings as cement mineralizer and iron raw material

A Novel Method of Extracting Iron from High-Iron Red Mud and Preparing Low-Carbon Cement Clinker from Tailings

Mechanical Properties and Hydration Mechanism of Iron Tailings–Cement-Based Supplementary Cementitious Materials

Resource utilization of semi-dry flue gas desulfurization ash by thermal treatment on sintering machine

Resource utilization of slag from desulphurization and slag skimming: A comprehensive recycling process of all components

Experimental Study on the Utilization of Metallic Tailings As Cement Active Admixture

Applied Research on Utilization of Metallic Tailings As Clay for Cement Production in Dry Rotary Kiln

Efficient recovery of zinc and copper from copper smelting slag (CSS) by cooperative modification with a composite medium of FeS-O2

A Clean Disposal Method of Carbide Slag with Carbon Emission Reduction: Used As a Flux for Iron Ore Sintering

Experiments on effect of red mud-based slag on distribution of sulfur in liquid iron

Recycling of ferronickel slag tailing in cementitious materials: Activation and performance

The Study on Sintered Porous Materials of Carbonate Tailings & Fly-ash

Present Situation and Research Progress of Comprehensive Utilization of Antimony Tailings and Smelting Slag

Study on the Effect of Flocculation and Sedimentation on the Mechanical Properties of Iron Tailing Sand

Innovative methodology for comprehensive utilization of iron ore tailings: part 2: The residues after iron recovery from iron ore tailings to prepare cementitious material.

Sintering process of Fenton sludge-derived water treatment filler

Preparation of calcium ferrite by flue gas desulfurization gypsum

Study on Separation of Iron from Waste Slag of Pyrite Processing

A novel approach for the resource utilization of zinc-bearing dust and sludge via the blast furnace main trough

Calculation for Mineral Phases in the Calcination of Desulfurization Residue to Produce Sulfoaluminate Cement