Abstract:The preparation of cement-based supplementary cementitious materials is an important method for the efficient use of iron tailings and the reduction in CO2 emissions. The aim of this study is to improve the reactivity of iron tailings by mixing them with steel slag, slag, and fly ash through orthogonal tests to solve the problem that iron tailings cannot be utilised on a large scale. The compressive strength, hydration products, and microstructure of the iron tailings–cement-based supplementary cementitious materials were investigated using ICP-OES, XRD, TG, FTIR, and SEM. The results revealed that each solid waste raw material played a distinct role in the hydration reaction. In the iron tailings–cement-based supplementary cementitious materials system, steel slag provided Ca2+, OH−, and Si4+ ions, slag provided Ca2+ and Al3+ ions, fly ash contributed a significant amount of Ca2+ and Al3+ ions, and iron tailings offered more nucleation sites and some Si4+ ions for the hydration products. Moreover, there was a synergistic effect among these four materials, promoting the formation of hydration products such as ettringite, C-(A)-S-H gels, and others. When the proportion of IOTs:SS:FA:SL was 9:8:8:2, the highest 7 d compressive strength of cementitious material was 24.8 MPa. When the proportion of IOTs:SS:FA:SL was 9:6:8:4, the highest 28 d compressive strength of cementitious material was 35.0 MPa. This study provides a comprehensive solution for the utilisation of iron tailings and contributes to the high-value green utilisation of solid waste.

Applied Research on Utilization of Metallic Tailings As Clay for Cement Production in Dry Rotary Kiln

Experimental study on utilization of metallic tailings as cement mineralizer and iron raw material

Experimental study on utilization of metallic tailings as clay for cement clinker calcinations

Experimental Study on the Utilization of Metallic Tailings As Cement Active Admixture

Utilization of Coal Gangue and Copper Tailings As Clay for Cement Clinker Calcinations

Feasibility study on utilization of copper tailings as raw meal and addition for low carbon Portland cement production

A Novel Method of Extracting Iron from High-Iron Red Mud and Preparing Low-Carbon Cement Clinker from Tailings

Potential utilization of copper tailings in the preparation of low heat cement clinker

Mechanical Properties and Hydration Mechanism of Iron Tailings–Cement-Based Supplementary Cementitious Materials

Experimental Study on the Concrete with Compound Admixture of Iron Tailings and Slag Powder under Low Cement Clinker System

Approach to the management of gold ore tailings via its application in cement production

Innovative methodology for comprehensive utilization of iron ore tailings: part 2: The residues after iron recovery from iron ore tailings to prepare cementitious material.

Recycling Coal Gangue As Raw Material for Portland Cement Production in Dry Rotary Kiln

Analysis of Influencing Factors of Cementitious Material Properties of Lead–Zinc Tailings Based on Orthogonal Tests

Investigation on industrial trial production of multi-phased clinker with crude granular steel slag

Influence of phosphogypsum on mechanical properties and microstructure of iron tailings cementitious material

Experimental Research on Aerated Concrete Preparation with Low-Silicon Tailings of Copper Mine

Integrated Utilization Of Sewage Sludge And Coal Gangue For Cement Clinker Products: Promoting Tricalcium Silicate Formation And Trace Elements Immobilization

Incorporation and solidification mechanism of manganese doped cement clinker

Experimental Research on Utilization of Coal Gangue As Clay for Optimized Formula on Cement Clinker Calcination

Research on Disposal of Solid Waste Incineration Fly Ashes by Cement Rotary Kiln Co-Processing