Abstract:In the context of the comprehensive green transformation of infrastructure construction, utilizing bulk waste tailings materials, such as iron tailing, in cement-based materials commonly used in the infrastructure sector holds significant practical importance. However, there are differences in the range of iron tailings content used in previous studies, and the research results are quite scattered. There has not yet been a recommendation for a reasonable material ratio, which severely restricts the resource utilization of iron tailings in cement-based materials. To effectively guide the design and performance optimization of cement-based materials using iron tailing, recent advances related to iron tailing cement-based materials have been reviewed systematically. The previous studies on the composition design of iron tailing in cement-based materials were summarized, and the effect of iron tailing and cement on the mechanical properties and durability of various cement-based materials were highlighted. The results show that the recommended content of iron tailing sand in concrete is 25–50%. Under this content, the mechanical properties of iron tailing sand concrete increase the most, and it has better drying shrinkage performance and carbonation resistance. For cement stabilized base materials, the recommended content of iron tailing sand is 11–20%. Under this content, its mechanical properties increase significantly, and it also has excellent drying shrinkage and temperature shrinkage performance. The increase in the content of iron tailing stones reduces the mechanical properties of cement stabilized materials. Cement stabilized iron tailing stones can be applied to the roadbase by adjusting the cement content and the content of iron tailing stones.

Experimental study on utilization of metallic tailings as cement mineralizer and iron raw material

Experimental study on utilization of metallic tailings as clay for cement clinker calcinations

Experimental Study on the Utilization of Metallic Tailings As Cement Active Admixture

Applied Research on Utilization of Metallic Tailings As Clay for Cement Production in Dry Rotary Kiln

Utilization of Coal Gangue and Copper Tailings As Clay for Cement Clinker Calcinations

Feasibility study on utilization of copper tailings as raw meal and addition for low carbon Portland cement production

A Novel Method of Extracting Iron from High-Iron Red Mud and Preparing Low-Carbon Cement Clinker from Tailings

Potential utilization of copper tailings in the preparation of low heat cement clinker

Mechanical Properties and Hydration Mechanism of Iron Tailings–Cement-Based Supplementary Cementitious Materials

Innovative methodology for comprehensive utilization of iron ore tailings: part 2: The residues after iron recovery from iron ore tailings to prepare cementitious material.

Experimental Study on the Concrete with Compound Admixture of Iron Tailings and Slag Powder under Low Cement Clinker System

Experimental Investigation on the Performance of Cement Mortar by Partial Replacement of the Standard Sands with Sulfide-Contained Iron Tailings

Effect of Iron Tailings as Fine Aggregate and Mineral Admixture on Strength and Microstructure of Cement Mortar

Analysis on Energy Saving of FeS_2 of the Flotation Metal Tailing in the Process of Cement Calcining

Recent Advances in Properties and Application Progress of Cement-Based Materials with Iron Tailing

Influence of phosphogypsum on mechanical properties and microstructure of iron tailings cementitious material

Exploring the Potential for Utilization of Medium and Highly Sulfidic Mine Tailings in Construction Materials: A Review

Approach to the management of gold ore tailings via its application in cement production

Effect of Steel Slag on Burnality of Cement Raw Meal

Test research on the effects of mechanochemically activated iron tailings on the compressive strength of concrete

Effect of Iron Tailings and Slag Powders on Workability and Mechanical Properties of Concrete