Abstract:A tantalum carbide (TaC) ceramic gradient composite was produced on the surface of an iron matrix by an in situ technique comprising a casting process and a subsequent heat treatment. In this study, the phase constituents, microstructure, microhardness, and wear resistance of the gradient composite were analysed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), a Vickers hardness tester, and a wear resistance tester, respectively. The results showed that the gradient composite can be divided into three zones according to the variation in the volume fraction of TaC ceramic particulates, which can be labelled as follows: micro-nanostructure TaC ceramic dense layer, micro-structure TaC ceramic layer and TaC ceramic particulate composite layer, where the combination between the gradient composite and matrix present a perfect metallurgical bond. The mean micro-hardness of the TaC ceramic gradient composite gradually decreased from the upper surface to the matrix due to the TaC ceramic particulates growing larger and their volume fraction gradually decreasing in different reaction zones.The microhardness of the micro-nanostructure TaC ceramic dense layer was the highest (2028HV0.1), and the average size of the TaC particulates in this layer was less than 200nm, with a volume fraction of more than 95%. In addition, the relative wear resistance gradually increased from the matrix to the surface. The wear mechanism of zone [A] was mainly characterised by plastic deformation and a few microcracks, while zones [B] and [C] experienced a combination of micro-ploughing with some TaC particulates broken. zone [C] was also characterised by squeeze traces because of the increased matrix. On the whole, the surface TaC ceramic gradient composite effectively protected the iron matrix from serious abrasion.

Research on Microstructure and Wear Resistance of (fe,cr)<sub>7</sub>c<sub>3</sub>/fe Surface Gradient Composite

Microstructure and Wear Properties of In Situ Production of (Fe,Cr)7C3 Particulate Bundles Reinforced Iron Matrix Composites

Microstructure and Wear Properties of<i> In Situ </i>Production of (Fe,Cr)<sub>7</sub>C<sub>3</sub> Particulate Bundles Reinforced Iron Matrix Composites

Microstructure, Microhardness and Wear Resistance of VCp/Fe Surface Composites Fabricated in Situ

Microstructure and Dry Sliding Wear Behavior of Fe-Based (Cr, Fe) 7 C 3 Composite Coating Fabricated by PTA Welding Process

(Fe, Cr)7C3/Fe Composite In-situ Synthesized by Cast Iron and Cr Bar

Abrasive wear characteristics of in-situ TiC-reinforced iron matrix surface gradient composites

Microstructure and Wear Resistance of (Cr,fe)7c3/γ-Fe Alloy Cladding Layer Synthetized by VEB

Microstructure and Wear Resistance of Iron Matrix Composites Reinforced by In-Situ Carbides

In-Situ Production of (Fe,cr)(7)c-3 Particulate Bundles Reinforced Iron Matrix Composites

Friction and Wear Performance of Carbide (cr, Fe)7C3-reinforced Fe-based Composite Coating

Fabrication, Microstructure and Abrasive Wear Characteristics of an in Situ Tantalum Carbide Ceramic Gradient Composite

MICROSTRUCTURE AND WEAR RESISTANCE OF CHROMIUM CARBIDE COATING IN SITU SYNTHESIZED BY VEB

Infiltration Casting and <i>In Situ</i> Fabrication of (Fe,Cr)<sub>7</sub>C<sub>3</sub> Particulates Bundle – Reinforced Iron Matrix Composites

Effect of Chromium-Induced (fe, Cr)3C Toughness Improvement on the Two-Body Abrasive Wear Behaviors of White Cast Iron

Interfacial Characteristics and Wear Resistance of WCp/White-Cast-Iron Composites

Interfacial characteristics and wear resistance of WCp/white-cast-ion composites

Infiltration casting and in-situ fabrication of (Fe,Cr) 7C 3 particulates bundle - Reinforced iron matrix composites

Effect of Cr3C2 Content on the Microstructure and Wear Resistance of Fe3Al/Cr3C2 Composites

Study on Surface WC Particle Reinforced Chromium Abrasion Resistant White Cast Irons Composite

Interface Structure and Wear Behavior of Cr26 Ferrous Matrix Surface Composites Reinforced with CTC P

Research on Microstructure and Wear Resistance of (fe,cr)&lt;sub&gt;7&lt;/sub&gt;c&lt;sub&gt;3&lt;/sub&gt;/fe Surface Gradient Composite