Abstract:Precise control of the crystal phase of TiO2 by sputtering at room temperature is particularly important for practical applications. In this paper, nanocrystalline TiO2 films were deposited on glass and silicon substrates using DC reactive magnetron sputtering without external heating. The phase composition and preferred orientation of the TiO2 films could be controlled by adjusting the negative bias voltages. It was found that TiO2 films deposited at free negative bias voltage or ground exhibited an anatase single phase with a strong (101) preferred orientation, while the preferred orientation transformed into (211) when the negative bias voltage reached −50V. A further increase in the negative bias voltage induced the formation of an additional rutile phase, thus generating a mixed phase of anatase and rutile. A pure rutile phase was obtained at high negative bias voltage (≥−100V). The rutile phase with (101) preferred orientation could also be obtained by increasing the bias voltages above −125V. In addition, the TiO2 films of different phases performed different photocatalytic activities. The anatase TiO2 films showed higher photocatalytic activity than rutile phase films. Particularly, anatase TiO2 films with (211) preferred orientation showed a significant photocatalytic degradation of organic dye (Rhodamine B), the degradation of which reached over 90% after an irradiation time of 2h.

APPLICATION AND OPTICAL PROPERTIES OF TiO_2 THINFILMS PREPARED BY CHEMICAL VAPOUR DEPOSITION

Investigation of structure and properties of N-doped TiO2 thin films grown by APCVD

Microstructures and Properties of N-Doped TiO_2 Films Grown by Atmospheric Pressure Chemical Vapor Deposition

Study on Structural, Optical and Hydrophilic Properties of FTO/TiO2 Tandem Thin Film Prepared by Aerosol-Assisted Chemical Vapor Deposition Method

Fabrication of Titanium Dioxide Thin Films by DBD-CVD under Atmosphere

Electrical and optical properties of titanium nitride coatings prepared by atmospheric pressure chemical vapor deposition

(Invited) Pure Anatase Phase Titanium Dioxide Thin Films Prepared by Mist Chemical Vapor Deposition Applying for Photocatalysis

The Structure and Properties of V Doped TiN Films Prepared at Various Temperatures

Structure and Properties of Nitrogen-Doped Titanium Dioxide Thin Films Grown by Atmospheric Pressure Chemical Vapor Deposition

TiNx Thin Films for Energy-Saving Application Prepared by Atmospheric Pressure Chemical Vapor Deposition

Structure, Electrical and Optical Properties of TiNx Films by Atmospheric Pressure Chemical Vapor Deposition

Study of optical and electrical properties of TiN thin films prepared by cathodic ion sputtering

Structural and optical properties of TiO2 thin films prepared by spin coating

TiO2 films prepared by DC reactive magnetron sputtering at room temperature: Phase control and photocatalytic properties

Study on the Electrical and Optical Properties of Vanadium Doped TiN Thin Films Prepared by Atmospheric Pressure Chemical Vapor

Optical Constants and Band Gap Evolution with Phase Transition in Sub-20-nm-Thick TiO2 Films Prepared by ALD

Impact of Thickness of Columnar Crystal TiO2 Film on Photocatalytic Activity of FTO/TiO2 Coated Glass

Thickness Dependent Optical Properties of Titanium Oxide Thin Films

Characterization and Photocatalytic Activity of Tio2 Films Loaded on Different Substrates

Electronic and Optical Properties of TiO2 Thin Films: Combined Experimental and Theoretical Study

Structure and hydrophilicity of titanium dioxide film prepared by atmospheric pressure chemical vapor deposition