Efficient Hybrid Capacitive Deionization Device with High Operating Voltage Based on Layered Sodium Manganese Oxide

Dongsheng Liu,Xiufang Xie,Yongqi Liu,Zhihui Pang,Xueying Li,Lizhuang Chen,Yuanyuan Dan
DOI: https://doi.org/10.1021/acsestwater.3c00668
2023-01-01
ACS ES&T Water
Abstract:This study aims to synthesize sodium manganese oxide through a single-step hydrothermal method, enabling precise temperature control for manipulating the structure, composition, morphology, and sodium storage performance of the products. The synthesized Na0.55Mn2O41.5H(2)O demonstrated a stable two-dimensional nanosheet structure and a significantly large specific surface area when prepared at a temperature of 180 degrees C. Under constant current charge-discharge conditions in a neutral solution, the material exhibited a specific capacitance of 184.3 F/g. By utilizing Na0.55Mn2O41.5H(2)O as the positive electrode and self-made pine bark biomass-activated carbon as the negative electrode in a Na0.55Mn2O41.5H(2)O|PBC-3 hybrid capacitor (HC), an optimized positive-to-negative electrode mass ratio of 1:3 resulted in the best overall performance. Notably, the system operated at a high voltage (1.5 V) without the requirement for ion-selective membranes. In a 1000 ppm NaCl solution, the system displayed an impressive desalination capacity of 44.8 mg/g and a desalination rate of 0.064 mg/g/s. At a higher removal rate of 0.095 mg/g/s, the system achieved a desalination capacity of 32.53 mg/g. Comparative analysis of comparable hybrid capacitive deionization devices revealed that the Na0.55Mn2O41.5H(2)O|PBC-3 HC displayed a high operating voltage and superior desalination performance. Moreover, these findings enhance the feasibility of using HCDI technology in large-scale water treatment systems.
What problem does this paper attempt to address?