Abstract:Integrating Faradaic (charge transfer) materials with carbon has been proven extensively to be a valid strategy to prepare highly efficient electrodes for electrochemical desalination or removal of heavy metal ions from wastewater via a capacitive deionization (CDI) platform. However, the influences of preliminary functionalization of the carbon component (e.g., nitrogen doping, hydroxyl grafting) and pairing of cathodes and anodes on the desalination performance have yet to be thoughtfully explored. Herein, we prepared a group of MnO2-decorated mesoporous carbon composites with nitrogen as a dopant (i.e., MK-NMCS, K-NMCS, NMCS, and CS), and systematically evaluated the desalination performance of various cathode//anode pairs in a hybrid capacitive deionization (HCDI) for capturing Na+, Cu2+, and Pb2+, respectively. Of all electrodes, the MK-NMCS//K-NMCS pair demonstrates the optimum desalination performance based on salt adsorption capacity (SAC) and cycling stability, offering a SAC of 25.4 mg g−1 and a SAC retention of 102.4% after 50 consecutive charge-discharge cycles at 1.2 V in 500 ppm NaCl solution. In addition, the MK-NMCS//K-NMCS electrodes also show the maximum ion adsorption capacity (IAC) toward Cu2+ and Pb2+ ions compared to other cathode//anode pairs, attaining an IAC of 37.0 and 30.0 mg Cu2+ per gram electrode materials at 1.2 V in 500 and 200 ppm Cu2+ solutions, respectively (cf. 32.2 mg Pb2+ per gram electrode materials in 200 ppm Pb2+ solution). Besides, these electrodes exhibit excellent cycling stability when applied in removing each heavy metal ion separately, with an IAC retention of 90.0% and 98.5% after 50 cycles toward Cu2+ and Pb2+ ions, respectively. Mechanical analysis reveals that both heavy metals are likely to be sequestered via capacitive electrosorption by carbon, intercalation with the MnO2, and surface complexation at the external surface of the [MnO6] octahedral layers. These findings underscore the pivotal roles of pre-functionalization of the original carbon and pairing of cathodes and anodes in the configuration of HCDI cells with improved performance and provide valuable insight into the optimization of Faradaic/carbon composite electrodes for remediation of wastewater with heavy metals via CDI platforms.

Manganese doping strategy for enhanced capacitive deionization performance of MoS 2

Novel MoS2/NOMC Electrodes with Enhanced Capacitive Deionization Performances

Confinement and phase engineering boosting 1T phase MoS2/carbon hybrid for high‐performance capacitive deionization

Interlayer-expanded 1T-Phase MoS2 As a Cathode Material for Enhanced Capacitive Deionization

Synergistic effect of intercalation and EDLC electrosorption of 2D/3D interconnected architectures to boost capacitive deionization for water desalination via MoSe2/mesoporous carbon hollow spheres

Well-dispersed few-layered MoS2 connected with robust 3D conductive architecture for rapid capacitive deionization process and its specific ion selectivity

Graphene Oxide-Tuned MoS2 with an Expanded Interlayer for Efficient Hybrid Capacitive Deionization

Synthesis of Low-Crystalline MnO2/MXene Composites for Capacitive Deionization with Efficient Desalination Capacity

3D Heterostructure Constructed by Few-Layered MXenes with a MoS 2 Layer as the Shielding Shell for Excellent Hybrid Capacitive Deionization and Enhanced Structural Stability

Carbon-embedded hierarchical and dual-anion C@MoSP heterostructure for efficient capacitive deionization of saline water

Polyaniline-derived Nitrogen-Doped Carbon/mos2 Nanocomposites As Cathode for Efficient Hybrid Capacitive Deionization

Capacitive Deionization with MoS2/g-C3N4 Electrodes

A novel ε-MnO 2 /MXene composite as an electrode with excellent conductivity and ultrahigh capacitive deionization

Efficient hybrid capacitive deionization with MnO2/g-C3N4 heterostructure: Enhancing Mn dz2 electron occupancy by interfacial electron bridge for fast charge transfer

Polyaniline coated MOF-derived Mn2O3 nanorods for efficient hybrid capacitive deionization

Pseudocapacitive desalination via valence engineering with spindle-like manganese oxide/carbon composites

3D heterostructure constructed by ion-doped polypyrrole coupled with MoS 2 @HCS and its highly efficient deionization performance

DBS−-doped Polypyrrole/cnts with 3D Conductive Architecture Connected with MoS2 As Symmetrical Electrodes for Boosted CDI Capability

Na2MnSiO4/C as hybrid capacitive deionization electrode material to enhance desalination performance

The exploration and comparison of adsorption mechanisms in MnO 2 with different crystal structures for capacitive deionization

MnO2 decorated N-doped mesoporous carbon electrodes boost enhanced removal of Cu2+ and Pb2+ ions from wastewater via a hybrid capacitive deionization platform