Abstract:Hybrid capacitive deionization (HCDI) is an emerging and promising technology for water desalination and has been extensively explored in recent years. Designing a structure-tailorable electrode material has been proved to be a valid strategy for achieving a higher salt adsorption capacity (SAC). In this study, MnO2 materials with tailorable phase compositions and crystallinities were prepared hydrothermally and then evaluated as electrodes for removal of ions from a NaCl solution in a membrane-free HCDI cell. MnO2 electrode materials tested in the HCDI system include poorly crystalline δ-MnO2 along with abundant amorphous phases (MnO2-1h); crystalline δ-MnO2 with plentiful amorphous MnO2 (MnO2-2h); MnO2 mixtures of α-, δ-, and amorphous MnO2 (MnO2-5h); and α-MnO2 nanowires with minor amorphous MnO2 (MnO2-12h). Our results revealed that the phase composition and the crystallinity of MnO2 materials govern their specific capacitances and thus the SAC values. When the cell voltage is 1.2 V, the lamellar-structured poorly crystalline MnO2-1h electrode with the lowest crystallinity demonstrates the highest SACs of 13.84 mg g–1 in 100 mg L–1 NaCl (1.71 mM) and 21.32 mg g–1 in 500 mg L–1 NaCl (8.56 mM) solutions, respectively. The desalination efficiencies of the MnO2−1h electrode are remarkable and much greater than other MnO2-based electrodes under similar conditions (e.g., NaCl concentrations, cell voltage, etc.). This study sheds light on the significance of understanding the fundamentals of both the phase composition and crystallinity in defining the desalination performance of MnO2 electrodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c04101?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c04101</a>.Phase weight percentages of MnO2; pore, microstructure, and electrochemical characterization data of MnO2; Na+ fractions in cycled electrodes; schematic of the CDI device; N2 absorption–desorption isotherms and pore size distribution of MnO2; curves of CV, GCD, and IR drops of electrodes; comparison of the maximum SACs of electrodes with previous references; curves of recycling performance and the corresponding current response of the MnO2-1h electrode; and XRD patterns of the MnO2-1h electrode before and after desalination (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c04101/suppl_file/sc0c04101_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Electrochemically activated layered manganese oxide for selective removal of calcium and magnesium ions in hybrid capacitive deionization

Selective electrosorption of Ca2+ by MXene cathodes coupled with NiAl-LMO anodes through ion intercalation

Boosted brackish water desalination and water softening by facilely designed MnO2/hierarchical porous carbon as capacitive deionization electrode

Intrinsic Pseudocapacitive Affinity in Manganese Spinel Ferrite Nanospheres for High-Performance Selective Capacitive Removal of Ca 2+ and Mg 2+

Efficient hybrid capacitive deionization with MnO2/g-C3N4 heterostructure: Enhancing Mn dz2 electron occupancy by interfacial electron bridge for fast charge transfer

MnO2 decorated N-doped mesoporous carbon electrodes boost enhanced removal of Cu2+ and Pb2+ ions from wastewater via a hybrid capacitive deionization platform

Synthesis of Low-Crystalline MnO2/MXene Composites for Capacitive Deionization with Efficient Desalination Capacity

Li‐Ions Pre‐intercalation Strategy of Manganese Oxides for Capacitive Deionization‐Based Selective Lithium Extraction From Low‐grade Brine

Cationic segregation of Ca2Mn3O8 enabling high selectivity for fluoride ions through capacitive deionization

Electrodeposited Manganese Dioxide/Activated Carbon Composite As a High-Performance Electrode Material for Capacitive Deionization

High-performance capacitive deionization electrodes through regulated electrodeposition of manganese oxide and nickel-manganese oxide/hydroxide onto activated carbon

Selective phosphate removal with manganese oxide composite anion exchange membranes in membrane capacitive deionization

Enhanced capacitive deionization of toxic metal ions using nanoporous walnut shell-derived carbon

Selective Pseudocapacitive Deionization of Calcium Ions in Copper Hexacyanoferrate

Ion selective electrosorption by two pseudocapacitive intercalating nanocomposite electrodes

Efficient dual-ions hybrid capacitive system for superior deionization with enhanced kinetics match

Electrochemical Removal of Cesium Ions via Capacitive Deionization Using an Ion-Exchange Layer Coated on a Carbon Electrode

Na2MnSiO4/C as hybrid capacitive deionization electrode material to enhance desalination performance

Manganese doping strategy for enhanced capacitive deionization performance of MoS 2

Local Electric Field Induced by Atomic‐Level Donor–Acceptor Couple of O Vacancies and Mn Atoms Enables Efficient Hybrid Capacitive Deionization

Phase- and Crystallinity-Tailorable MnO 2 as an Electrode for Highly Efficient Hybrid Capacitive Deionization (HCDI)