Selective Pseudocapacitive Deionization of Calcium Ions in Copper Hexacyanoferrate

Yingsheng Xu,Hongjian Zhou,Guozhong Wang,Yunxia Zhang,Haimin Zhang,Huijun Zhao
DOI: https://doi.org/10.1021/acsami.0c11233
2020-08-21
Abstract:In recent years, the capacitive deionization (CDI) technology has gradually become a promising technology for hard water treatment. Up to now, most of the work for water softening in CDI was severely limited by the inferior selectivity and electrosorption performances of carbon-based electrodes in spite of combining Ca<sup>2+</sup>-selective ion-exchange resin or membranes. Pseudocapacitive electrode materials that selectively interact with specific ions by Faradic redox reactions or ion (de)intercalation offer an alternative strategy for highly selective electrosorption of Ca<sup>2+</sup> from water because of brilliant ion adsorption capacity. Here, we first used copper hexacyanoferrate (CuHCF) as a pseudocapacitive electrode to methodically study the selective pseudocapacitive deionization of Ca<sup>2+</sup> over Na<sup>+</sup> and Mg<sup>2+</sup>. Using the hybrid CDI cell consisting of a CuHCF cathode and an activated carbon anode without any ion-exchange membrane, the outstanding Ca<sup>2+</sup> electrosorption capacity of 42.8 mg·g<sup>–1</sup> and superior selectivity &amp;(Ca<sup>2+</sup>/Na<sup>+</sup>) of 3.05 at a molar ratio of 10:1 were obtained at 1.4 V, surpassing those of the reported carbon-based electrodes. Finally, electrochemical measurements and molecular dynamics (MD) simulations provided an in-depth understanding of the selective pseudocapacitive deionization of Ca<sup>2+</sup> ions in a CuHCF electrode. Our study would be helpful for developing high-efficiency selective electrosorption of target charged ions by intrinsic properties of pseudocapacitive materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c11233?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c11233</a>.Information about materials; structural characterization; electrochemical measurements; related calculating formula and fitting model; molecular dynamics; nitrogen adsorption–desorption isotherms and pore size distribution; TGA curve; EIS spectra; CV spectra; parameters of kinetics and the Langmuir isotherm; removal capacity for the hardness for different CDI electrodes; and interactions energies (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c11233/suppl_file/am0c11233_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology
What problem does this paper attempt to address?