Abstract:At present, most ultra-stable lasers are locked onto the optical cavity through Pound-Drever-Hall (PDH) technology, but the frequency instability of the locked laser is often limited by the thermal noise limit of the reference cavity. It can mainly be reduced by increasing the cavity length, or operating at cryogenic temperatures. Here, we present an ultra-stable laser based on a 30-cm-long room temperature cavity. The cavity consists of an ultralow expansion (ULE) glass spacer and fused silica (FS) mirrors with Al0.92Ga0.08As/GaAs crystalline coatings. A 1396.9-nm laser is stabilized on this cavity and a periodically poled lithium niobate (PPLN) waveguide is used to obtain 698.45 nm light for the strontium atomic clock by second harmonic generation (SHG). Technical noise contributions are estimated by beating another 698nm ultra-stable laser system based on a commercial 30-cm-long cavity. The zero-coefficient thermal expansion (zero-CTE) temperature of the cavity is about 266.2 K, and the time transport constant is 1.2×106 s. The total noise is the sum of all estimated noise contributions and the short-term frequency stability mainly dominated by the vibration noise. The evaluation of total noise is close to the frequency instability of the 1×10−16 at the 1 s average time.

An Ultra-Stable Laser Based on a Room-Temperature Optical Cavity with Crystalline Coatings