Abstract:Ultra-stable lasers are pivotal in various scientific applications, notably in space gravitational wave detection projects. We develop a space-borne ultra-stable laser system based on a home-made non-planar ring oscillator (NPRO) laser and an ultra-stable cavity laser stabilization system. The ultra-stable cavity is a vertically mounted 8 cm long cavity, with tunable zero-crossing temperature and low vibrational sensitivity. To make a cavity with any standard grade ultra-low expansion glass (ULE) material, and tune the zero-crossing temperature to the satellite platform temperature, we design three ultra-stable cavities with different configurations to unambiguously explore their thermal properties. The measurement results meet the design goals well, and the zero-crossing temperature of the cavity can be tuned from -19 °C to 16.0 °C. We measure the temperature fluctuation noise through modulation experiment, and it agrees well with the theoretical simulations. The vibrational sensitivities in three directions are measured to be around 10 -11 /g-10 -10 /g. The total weight of the system is 14.0 kg, with a volume of about 18 L, and the power dissipation of the electrical system is 18.6 W. Finally, the prototype of the space-borne laser shows a frequency instability of 9.5×10 -16 at 0.2 s, and the frequency noise is measured to be 3.6 Hz/Hz 1/2 at 6 mHz over three months, satisfying the mission targets of all current space gravitational wave detection programs.

Ultrastable lasers based on vibration insensitive cavities

A Vibration-Insensitive Optical Cavity and Absolute Determination of Its Ultrahigh Stability.

An Ultrastable 1397-Nm Laser Stabilized by a Crystalline-Coated Room-Temperature Cavity.

Ultra-stable Cryogenic Sapphire Cavity Laser with an Instability Reaching 2 × 10−16 Based on a Low Vibration Level Cryostat

An Ultra-Stable Laser Based on a Room-Temperature Optical Cavity with Crystalline Coatings

An ultra-stable cryogenic sapphire cavity laser with an instability of $1.9\times10^{-16}$ based on a low vibration level cryostat

Ultrastable vacuum-gap Fabry-Pérot cavities operated in air

Laser Frequency Instability of 6X10-16 Using 10-Cm-long Cavities on a Cubic Spacer

Multi-cavity-stabilized Ultrastable Laser

Ultra-stable 1064-nm neodymium-doped yttrium aluminum garnet lasers with 2.5 × 10-16 frequency instability

Fiber-coupled 2 mL vacuum-gap Fabry-Perot reference cavity for portable laser stabilization

Multi-cavity ultra-stable laser towards 10-18

0.26-Hz-linewidth Ultrastable Lasers at 1557 Nm

A space-borne ultra-stable laser system with an excellent long-term frequency stability for gravitational wave detection

Towards space-deployable laser stabilization systems based on vibration-insensitive cubic cavities with crystalline coatings

Ultrastable Laser Based on Multi-Cavity

Contribution of Thermal Noise to Frequency Stability of Rigid Optical Cavity Via Hertz-linewidth Lasers

Ultra-stable laser with average fractional frequency drift rate below $5\times10^{-19}/\mathrm{s}$

Laser frequency instability of 2 × 10 -16 by stabilizing to 30-cm-long Fabry-Pérot cavities at 578 nm.

Sub-Hertz Frequency Stabilization of a Commercial Diode Laser

8E-17 fractional laser frequency instability with a long room-temperature cavity