Abstract:The Energetic X-ray Imaging Survey Telescope (EXIST) is a mission design concept that uses coded masks seen by Cadmium Zinc Telluride (CZT) detectors to register hard X-rays in the energy region from 10 keV to 600 keV. A partially active or fully active anti-coincidence shield/collimator with a total area of between 15 and 35 square meters will be used to define the field of view of the CZT detectors and to suppress the background of cosmic-ray-induced events. In this paper, we describe the use of a sodium activated cesium iodide shield/collimator to detect gamma-ray bursts (GRBs) and to measure their energy spectra in the energy range from 100 keV up to 10 MeV. We use the code GEANT4 to simulate the interactions of photons and cosmic rays with the spacecraft and instrument and the code DETECT2000 to simulate the optical properties of the scintillation detectors. The shield collimator achieves a nu-F-nu sensitivity of 3 x 10^(-9) erg cm^(-2) s^(-1) and 2 x 10^(-8) erg cm^(-2) s^(-1) at 100 keV and 600 keV, respectively. The sensitivity is well matched to that of the coded mask telescope. The broad energy coverage of an EXIST-type mission with active shields will constrain the peak of the spectral energy distribution (SED) for a large number of GRBs. The measurement of the SED peak may be key for determining photometric GRB redshifts and for using GRBs as cosmological probes.

Ultra-Stable Rubidium-Stabilized External-Cavity Diode Laser Based on the Modulation Transfer Spectroscopy Technique

Research on the Frequency Stabilization System of an External Cavity Diode Laser Based on Rubidium Atomic Modulation Transfer Spectroscopy Technology

External Cavity Diode Laser with Long-Term Frequency Stabilization Based on Mode Boundary Detection

Development Of Ultra-Stable Rb-Referenced 420nm Optical Frequency Standard

Frequency-stabilized Diode Laser at 780 Nm with a Continuously Locked Time over 100 H

Stabilizing Diode Laser to 1 Hz-level Allan Deviation with Atomic Spectroscopy for Rb Four-Level Active Optical Frequency Standard

Dual-Wavelength Ultra-Stable Laser Operating at 780 Nm and 852 Nm

Long-Term Frequency Stabilization System For External Cavity Diode Laser Based On Mode Boundary Detection

DFB Laser Diode Pumped Rubidium Atomic Frequency Standard

An Ultra-Stable Laser Based on a Room-Temperature Optical Cavity with Crystalline Coatings

High-Stability Rb Optical Clock Based on Pulse-Modulated Broad-Spectrum Comb-Tooth Laser

Using the Active Collimator and Shield Assembly of an EXIST-Type Mission as a Gamma-Ray Burst Spectrometer

Modulation-free frequency stabilization system of external cavity diode laser based on Sagnac loop

A 420nm Blue Diode Laser for the Potential Rubidium Optical Frequency Standard

Laser Frequency Stabilization and Shifting by Using Modulation Transfer Spectroscopy

Modulation-Free Frequency Stabilization of A Grating-External-Cavity Diode Laser by Magnetically Induced Sub-Doppler Dichroism in Cesium Vapor Cell

Thermal-noise-limited ultra-stable laser operated at 698 nm

Designing an Automatic Frequency Stabilization System for an External Cavity Diode Laser Using a Data Acquisition Card in the LabVIEW Platform

Transferring The Stability Of Iodine-Stabilized Diode Laser At 634 Nm To Radio Frequency By An Optical Frequency Comb

Stabilized DFB Laser System with Large Tuning Range

Two Schemes Of Modulation-Free Frequency Stabilization Of Grating-External-Cavity Diode Laser Via Cesium Sub-Doppler Spectra