Abstract:To achieve high-frequency stability on the external cavity diode laser (ECDL), a 780 nm ECDL serves as the seed light source, and its frequency is precisely locked to the saturated absorption peak of rubidium (Rb) atoms using modulation transfer spectroscopy (MTS) technology. For improving the performance of frequency locking, the scheme is designed to find the optimal operating conditions. Correlations between the frequency discrimination signal (FDS) and critical parameters, such as the temperature of the Rb cell, the power ratio of the probe and pump light, and the frequency and amplitude of the modulation and demodulation signals, are observed to attain the optimal conditions for frequency locking. To evaluate the performance of the frequency-stabilized 780 nm ECDL, a dual-beam heterodyne setup was constructed. Through this arrangement, the laser linewidth, approximately 65.4 kHz, is measured. Then, the frequency stability of the laser, quantified as low as 4.886 × 10−12 @32 s, is determined by measuring the beat-frequency signal with a frequency counter and calculating the Allan variance. Furthermore, using the realized frequency locking technology, the 780 nm ECDL can achieve long-term stabilization even after 25 h. The test results show the exceptional performance of the implemented frequency stabilization system for the 780 nm ECDL.
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to achieve high - frequency stability of an external - cavity diode laser (ECDL). Specifically, the researchers use rubidium - atom modulation - transfer - spectroscopy (MTS) technology to accurately lock the frequency of a 780 - nm ECDL on the saturation - absorption peak of rubidium atoms. To improve the frequency - locking performance, the researchers designed a set of schemes to find the optimal working conditions, including:
1. **Rubidium - atom - cell temperature**: Study the influence of the rubidium - atom - cell temperature on the frequency - discrimination signal (FDS) to find the optimal temperature.
2. **Power ratio of probe light and pump light**: Analyze the changes in FDS under different power ratios to determine the optimal power ratio.
3. **Frequencies and amplitudes of modulation and demodulation signals**: Optimize the parameters of modulation and demodulation signals to obtain the optimal FDS slope and peak.
Through these optimization measures, the researchers aim to achieve the long - term stability and high - frequency stability of ECDL. The experimental results show that the optimized system can maintain a stable laser frequency for a long time, with a very low linewidth (about 65.4 kHz) and high - frequency stability (as low as \(4.886\times 10^{-12}\) @ 32 s). In addition, the system performs well in the long - term stability test within 25 hours.
### Key formulas
1. **Expression of electric field**:
\[
E(t)=E_0\sin[(\omega_c + \delta\sin\omega_m t)t]
\]
where \(\delta\) is the modulation depth, \(\omega_m\) is the modulation frequency, \(t\) is the modulation time, and \(J_n(\delta)\) is the \(n\) - th - order Bessel function.
2. **Expression of beat - frequency signal**:
\[
S(\omega_m)=C\sqrt{\Gamma^2+\omega_m^2}\sum_{n = -\infty}^{\infty}J_n(\delta)J_{n - 1}(\delta)\left[\left(L_{(n + 1)/2}+L_{(n - 2)/2}\right)\cos(\omega_m t+\phi_d)+\left(D_{(n + 1)/2}+D_{(n - 2)/2}\right)\sin(\omega_m t+\phi_d)\right]
\]
3. **Frequency - discrimination signal (FDS)**:
\[
FDS=\frac{C(\omega_m,\delta)}{2}\left[L(\omega_m)\sin(\phi_q-\phi_d)+D(\omega_m)\cos(\phi_q-\phi_d)\right]
\]
By adjusting the phase difference \(\phi_q-\phi_d\), the magnitudes of the absorption and dispersion components can be changed, so that the peak and slope of FDS reach the maximum values, which is beneficial to the frequency - locking operation.
### Summary
This research successfully achieved high - frequency stability and long - term stability of ECDL by optimizing the key parameters in rubidium - atom modulation - transfer - spectroscopy technology, providing important technical support for fields such as quantum mechanics and precision measurement.