Abstract:Mechanical property testing, spectral analysis, phase analysis, scattering evaluation and mechanism research of CFRP under various temperature and moisture composite environments. Temperature and moisture are important environmental conditions governing the usage of carbon fiber‐reinforced plastics (CFRP). In this study, tensile, compression, and shear tests of woven CFRP composites were conducted in four composite environments: cold‐temperature dry state, room‐temperature dry state, elevated‐temperature dry state, and elevated‐temperature wet state. Fourier transform infrared (FTIR) spectroscopy was used to analyze the molecular composition and structure under these environments. The fracture morphology was also analyzed using scanning electron microscopy (SEM) to understand the deterioration mechanism of the material properties at the macro and micro scales. Finally, a two‐parameter Weibull statistical model was used to evaluate the scattering of the composites. The results demonstrate that the tensile, compressive, and shear properties of the material decrease under harsh conditions, and the degradation effect on the ultimate strength is much greater than that of the modulus. Cold‐temperature dry and elevated‐temperature wet conditions are particularly severe. Composite environments significantly affect the macroscopic failure process and ultimate failure mode of materials. In general, the temperature and humidity of the matrix system acts at the core of the deterioration mechanism of composites, affecting the properties of the fiber/matrix and orthogonal woven fiber interfaces, and eventually resulting in a loss of their constitutive strength and bearing capacity. The theoretical ultimate strength were consistent with the experimental values. Highlights Comprehensive mechanical property testing in multiple composite environments. Degradation mechanisms were revealed from multiscale morphology analysis. Scattering of composites were evaluated using statistical analyses. Cold temperature dry and elevated temperature wet were the worst states. Deterioration effect of environment on matrix and interface is the core failure mechanism.

Investigation on the Mechanical Properties and Damage Mechanisms of Plain-Woven Composites at Elevated Temperatures Through a Newly-Designed Testing System

DSI-based Studies of the Effects of High-temperature Aging on Local Mechanical Properties of HR3C/T92 Dissimilar Steel Welded Joint

The temperature effect on the inter-laminar shear properties and failure mechanism of 3D orthogonal woven composites

Real-time Evaluating Temperature-Dependent Interfacial Shear Strength of Thermoplastic Composites Based on Stress Impedance Effect of Magnetic Fibers

Transverse impacts‐induced deformation and damage of 3D angle‐interlock woven composites at elevated temperatures

Deterioration of Mechanical Properties of Novel Constructional Steel Material at Elevated Temperatures

Effect of temperature and moisture composite environments on the mechanical properties and mechanisms of woven carbon fiber composites

Elevated temperature effect on tension fatigue behavior and failure mechanism of carbon/epoxy 3D angle-interlock woven composites

Mechanical Properties and Microstructures of Steel-basalt Hybrid Fibers Reinforced Cement-based Composites Exposed to High Temperatures

Tensile Mechanical Behavior and Failure Mechanism of a Plain-Woven SiCf/SiC Composites at Room and Elevated Temperatures

Experimental investigation on mechanical response and failure analysis of 3D multi-axial warp knitted hybrid composites

High-fidelity prediction and temperature-rise mechanism for low-velocity impact of triaxially braided composites

Longitudinal compression fatigue properties of 3D five-directional braided composites at different temperatures

Numerical investigation on mechanical behavior of 3D orthogonal woven composites in hygrothermal environments

Effects of high temperature and strain rate on the impact-induced inter-laminar shear behavior of plain woven CF/PEEK thermoplastic composites

Strain Rate and Temperature Effect on Mechanical Properties and Failure of 3D Needle-Punched Carbon/Carbon Composites under Dynamic Loading

Experimental investigation on the fatigue life and damage mechanism of plain weave composites under biaxial tension–torsion combined fatigue loading

On the tensile properties and failure mechanisms of 3D six-directional braided composites at elevated temperatures

Transverse bending fatigue behaviors and failure mechanisms of 3D five-directional braided composites at different temperatures

Study on in-plane compression properties and numerical modeling of three dimensional five-directional braided composites

Experimental study on the fabrication, high-temperature properties and failure analysis of 3D seven-directional braided composites under compression