Abstract:A micromixer is one of the most significant components in a microfluidic system. A three-dimensional micromixer was developed with advantages of high efficiency, simple fabrication, easy integration, and ease of mass production. The designed principle is based on the concepts of splitting–recombination and chaotic advection. A numerical model of this micromixer was established to characterize the mixing performance for different parameters. A critical Reynolds number (Re) was obtained from the simulation results. When the Re number is smaller than the critical value, the fluid mixing is mainly dependent on the mechanism of splitting–recombination, therefore, the length of the channel capable of complete mixing (complete mixing length) increases as the Re number increases. When the Re number is larger than the critical value, the fluid mixing is dominated by chaotic advection, and the complete mixing length decreases as the Re number increases. For normal fluids, a complete mixing length of 500 µm can be achieved at a very small Re number of 0.007 and increases to 2400 µm as the Re number increases to the critical value of 4.7. As the Re number keep increasing and passes the critical Re number, the complete mixing length continues to descend to 650 µm at the Re number of 66.7. For hard-to-mix fluids (generally referring to fluids with high viscosity and low diffusion coefficient, which are difficult to mix), even though no evidence of strong chaotic advection is presented in the simulation, the micromixer can still achieve a complete mixing length of 2550 µm. The mixing performance of the micromixer was also verified by experiments. The experimental results showed a consistent trend with the numerical simulation results, which both climb upward when the Re number is around 0.007 (flow rate of 0.03 μm/min) to around 10 (flow rate of 50 μm/min), then descend when the Re number is around 13.3 (flow rate of 60 µm/min).

Design and Scale-Up of a Superb Micromixer with Fan-Shaped Obstacles for Synthesis of Dolutegravir Intermediate

Performance Evaluation and Scale-Up Behavior of an Engineered In-Line Mixer for 3D Printing

A Novel Passive Micromixer with Modified Asymmetric Lateral Wall Structures

Full-cycle study on developing a novel structured micromixer and evaluating the nanoparticle products as mRNA delivery carriers

Mixing in a co-flow-focusing structured droplet-based micromixer

Design and Experimental Study of Staggered Oriented Ridges Micromixers

Design and Evaluation of an Easily Fabricated Micromixer with Three-Dimensional Periodic Perturbation

Enhanced Mixing Efficiency for a Novel 3D Tesla Micromixer for Newtonian and Non-Newtonian Fluids

Experimental and Numerical Investigation on the Scaling-Up of Microsieve Dispersion Mixers

Micromixing Enhancement in a Novel Passive Mixer with Symmetrical Cylindrical Grooves

Novel Micromixer with Complex 3D-Shape Inner Units: Design, Simulation and Additive Manufacturing

Design and Simulation of a Passive Micromixer with Gourd-Shaped Channel.

Computational Fluid Dynamics Simulation and Experimental Study on Mixing Performance of a Three-Dimensional Circular Cyclone-Type Microreactor

Mixing Characterization and Scaling-Up Analysis of Asymmetrical T-shaped Micromixer: Experiment and CFD Simulation

A Directly Moldable, Highly Compact, and Easy-for-Integration 3D Micromixer with Extraordinary Mixing Performance

A Novel 3D Tesla Valve Micromixer for Efficient Mixing and Chitosan Nanoparticle Production

Numerical Investigation of Flow Patterns and Mixing Characteristics in a 3D Micromixer with Helical Elements over Wide Reynolds Numbers

An Efficient 3D-Printed Gravity Mixer for Lab-on-a-CD Applications

Investigations of the mixing efficiency of five novel micromixer designs with backward arrow inlet using the Villermaux Dushman protocol

Mixing Performance Analysis and Optimal Design of a Novel Passive Baffle Micromixer

A Three-Dimensional Micromixer Using Oblique Embedded Ridges