Abstract:We introduced a new, highly efficient, and uncomplicated mixing device for centrifugal microfluidic platforms, called the gravity mixer. The gravity mixer featured a slope channel that can precisely and sequentially control micro-volume liquids using centrifugal, capillary, and gravitational forces to achieve the desired mixing effect. By adjusting the angular velocity, micro-volumes of liquids in the slope channel of the gravity mixer could be precisely controlled across a wide range. We evaluated the change in mixing efficiency by varying the slope geometry, including the slope angle and the number of mixing cycles. Our study of gravity mixers with different slope angles revealed that the 80° angle gravity mixer achieved the best mixing efficiency, with a standard deviation of 2.39. Additionally, the mixing process in the gravity mixer is highly repeatable, achieving the desired mixing efficiency after only three cycles of operation. Our gravity mixer design and implementation can facilitate the development of more complex 3D-printed lab-on-chip devices.
chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to achieve efficient and simple liquid mixing in the centrifugal microfluidic platform (Lab - on - a - CD, LOCD). Specifically, the researchers designed a 3D - printed gravity mixer, aiming to precisely control the mixing process of micro - volume liquids by using centrifugal force, capillary force and gravity, thereby improving the mixing efficiency. This mixer is especially suitable for miniaturized experimental devices that require rapid and efficient mixing, such as portable medical detection devices.
### Main problems
1. **Improving mixing efficiency**: Traditional microfluidic mixers are relatively complex in design, cumbersome in operation, and have low mixing efficiency. Through the design of a new - type gravity mixer, this research aims to overcome these problems and achieve higher mixing efficiency.
2. **Simplifying the manufacturing process**: Traditional microfluidic device manufacturing techniques (such as soft lithography, etching, etc.) require professional operators and expensive equipment. This research uses 3D - printing technology (especially LCD 3D - printing technology) to manufacture the mixer, simplifying the manufacturing process and reducing costs.
3. **Optimizing design parameters**: By changing the angle of the inclined plane and the number of mixing cycle times, the researchers evaluated the influence of different design parameters on the mixing efficiency in order to find the best design scheme.
### Key technologies
- **3D - printing technology**: Using LCD 3D - printing technology to manufacture the mixer, which has high precision and good transparency.
- **Gravity mixing mechanism**: By designing channels with inclined planes, the synergistic effect of gravity and centrifugal force is utilized to achieve efficient liquid mixing.
- **Experimental verification**: The mixing process is recorded by a high - speed camera to evaluate the mixing effect under different design parameters.
### Experimental results
- **Optimal inclined plane angle**: The research found that the gravity mixer with an inclined plane angle of 80° achieved the best mixing effect, with a standard deviation of 2.39.
- **High repeatability**: After only three mixing cycles, the gravity mixer can achieve the expected mixing effect.
- **Scope of application**: The mixer has a simple design and is easy to be integrated into more complex 3D - printed chip devices, and is suitable for a variety of microfluidic applications.
In conclusion, through the design and optimization of a 3D - printed gravity - based mixer, this paper solves the problems of low mixing efficiency and complex manufacturing in traditional microfluidic mixers, providing new solutions for portable medical detection and other microfluidic applications.