Abstract:Radio frequency identification (RFID) tags are widely used in various electronic devices due to their low cost, simple structure, and convenient data reading. This topic aims to study the key technologies of ultra-high frequency (UHF) RFID tags and high-precision temperature sensors, and how to reduce the power consumption of the temperature sensor and the overall circuits while maintaining minimal loss of performance. Combined with the biomedicine, an innovative high-precision human UHF RFID chip for body temperature monitoring is designed. In this study, a ring oscillator whose output frequency is linearly related to temperature is designed and proposed as a temperature-sensing circuit by innovatively combining auxiliary calibration technology. Then, a binary counter is used to count the pulses, and the temperature is ultimately calculated. This topic designed a relaxation oscillator independent of voltage and current. The various types of resistors were used to offset the temperature deviation. A current mirror array calibration circuit is used to calibrate the process corner deviation of the clock circuit with a self-calibration algorithm. This study mainly contributes to reducing power consumption and improving accuracy. The total power consumption of the RF/analog front-end and temperature sensor is . The measurement error of the temperature sensor in the range of 0 to 60°C is less than ±0.1%, and the accuracy of the output frequency of the clock circuit is ±2.5%.

An Ultra-Low-Power Temperature Sensor with an Accuracy of +0.6/-1 °C From−30 °C to 90 °C

An Ultra-Low-power CMOS Temperature Sensor for RFID Applications

An All-Digital CMOS Temperature Sensor with a Wide Supply Voltage Range.

An Inaccuracy of +/- 0.5 degrees C Digital Temperature Sensor From-40 degrees C to 125 degrees C With Curvature Correction

A Low-Power CMOS Smart Temperature Sensor for RFID Application

An Energy-Efficient BJT-Based Temperature Sensor with +/- 0.8 degrees C (3 sigma) Inaccuracy from-50 to 150 degrees C

A CMOS Temperature Sensor with Versatile Readout Scheme and High Accuracy for Multi-Sensor Systems

A 0.8V Capacitively-Biased BJT-Based Temperature Sensor with an Inaccuracy of ±0.4°C ($\mathbf{3}\mathbf{\sigma}$) from −40°C to 125°C in 22nm CMOS

Design of a 0.8V Low Power CMOS Temperature Sensor for RFID-based Train Axle Temperature Measurement

A Low Power Temperature Sensor for Passive Rfid Tag

A 1.2V Self-Referenced Temperature Sensor with a Time-Domain Readout and a Two-Step Improvement on Output Dynamic Range

A Low-Power Passive UHF Tag With High-Precision Temperature Sensor for Human Body Application

CMOS Digital Temperature Sensor with Self-Correcting Technique

A semi-passive UHF RFID tag with on-chip temperature sensor

A Power System for Passive UHF RFID Temperature Sensor with Ultra-Low Power

A novel low power wide supply voltage range CMOS temperature sensor with 0.2/0.5°C error from -20°C to 60°C

An Ultra-Low Power Temperature Sensor Based on Relaxation Oscillator in Standard CMOS

A Novel Low Power Wide Supply Voltage Range Cmos Temperature Sensor With-0.2/0.5 Degrees C Error From-20 Degrees C To 60 Degrees C

A Near-Zero-Power Temperature Sensor with ±0.24 °C Inaccuracy Using Only Standard CMOS Transistors for IoT Applications

A Low-Power Self-Calibration Digital-Output CMOS Temperature Sensor with ±0.1°C Inaccuracy from −40°C to 85°C

A Low Power Analog Front-End of BJT-based Temperature Sensor for Implanted RFID